Items Tagged With tutorials

I have had CCTV at home for 8 years now in one form or another. Over that time camera performance has increased, whilst prices have fallen. Par for the course where most technology is concerned I suppose. A year or so ago I bought a Samsung CCTV switcher from eBay to view our cameras by modulating its output round all the TVs in the house. Using its simple timer it switched between each camera at a set interval, while this worked it was frustrating as the camera you wanted to view was rarely the one that was on the screen at that particular moment in time. The eBay acquired switcher died a month or so ago and so the search for the “upgrade” was on...

Submission by: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it - This project is to address a major problem faced by many Home Automators, who are looking for a more intelligent way to monitor the status of their equipment throughout the home. In the past, I have struggled with monitoring Audio Visual Equipment status in various zones of the home. I used Smartlink probes hardwired into HomeVision, but when I added multi zone IR distribution via FirM, the system could not work within a multi zone environment...

"First things first, take an LD11 (or LD10 I guess), a case for same and your lamp and get ready. You'll also need some flex probably as most lamp flexes are not long enough to allow good placement as well as fitting the inline module. Usually I'll take new flex from the socket to the case/LD11 and use the lamp flex up to teh lamp by just removing the plugtop"...

Version 1.03 (Last updated August 2009)