HDMI Wall Plates with IR

Keene Electronics have just launched a new kit of HDMI Wall Plates with built-in IR capability. The pair of faceplates are passive so require no power supply.  They will send your HD signals room-to-room via 2 x CAT5 cables complete with IR feedback up to a distance of 30m.  Available now for around £90…

This extender sends HDMI signals via shielded network cable from an input wallplate to an output wallplate without signal loss. This works by running shielded network cables between each wallplate up

Features
Extends HDMI transmission up to 30m
Converts HDMI signal to Cat5e/6 TMDS signal
Supports 24/36bit deep colour video formats
Supports LPCM/LPCM7.1/DSD/DVD audio Dolby®-AC3/DTS5.1/DTS-HD/DTS master audio/Dolby® Digital Plus and Dolby® True-HD audio formats
Easy connection and installation
No power supply required
Requires Cat5e/6 STP/FTP cable (not supplied)
Supplied with an IR receiver and an IR emitter for IR feedback control

Specifications
HDMI version: High speed with 3D support
HDCP version: 1.2
Resolution: 1080P/1080i/720P/576P/576i/480P/480i
Data transfer rate: Max 6.75Gbps
Operating humidity range: 5% to 90% RH (no condensation)
Operating temperature range: -15°C to +55°C
Dimensions of plates: 86 x 86 x 32mm
Weight of plates (each): 46g
IR emitter and receiver lead length: 1.5m
Dimensions: 33 x 14 x 19mm
Weight: 25

HDMI Wall Plates with IR

Want More? - Follow us on Twitter, Like us on Facebook, or subscribe to our RSS feed. You can even get these news stories delivered via email, straight to your inbox every day.

2 Responses to “HDMI Wall Plates with IR”

  1. Stuart Grimshaw August 29, 2012 at 7:50 pm

    must … not … post about … the price!!!

  2. They also need Shielded/Foil twisted pair not the ubiquitous UTP. Hopefully a UTP version will follow shortly.