Evohome controller + 2 pc HCE80R

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • bazel27
    Automated Home Lurker
    • Jan 2015
    • 2

    Evohome controller + 2 pc HCE80R

    1) Anybody knows , is it possible to connect 2 underfloor controlers HCE80R(total 10 zones) to one Evohome controller ? Or evohome controller support only one underfloor heating controller connection ?
    2) I have big 2-storey house , and planed to use 2 evohome controllers ,own for each floor. 1 RFG100 gateway is enough for 2 controller or i should by addition RFG100 ?

    Thx a lot
  • SensibleHeatUK
    Moderator
    • Feb 2009
    • 228

    #2
    You can have as many HCC80R Manifold Controllers registered to an Evo Touch as you can practically use, so two is no problem at all.

    You will need one RFG100! For every Evo Touch you install, you cannot register several Evos to one gateway.
    Sensible Heat
    SensibleHeat.co.uk

    Comment

    • bazel27
      Automated Home Lurker
      • Jan 2015
      • 2

      #3
      Originally posted by SensibleHeatUK View Post
      You can have as many HCC80R Manifold Controllers registered to an Evo Touch as you can practically use, so two is no problem at all.

      You will need one RFG100! For every Evo Touch you install, you cannot register several Evos to one gateway.
      thx , for the information.
      i'm planning to install this system for the first time.
      1) If i decide to use , 2 evohome controlles , own for each floor , how it will be shown on phone app ? own location/account needed for each controller ?
      or it will be registred like 2 devices in one location ? if
      2) If i decide to use one evohome controller , and compare some rooms like bedrooms , toilets/bathrooms , temperature setpoint will be the same if i control it from evohome controller , but can i manage it
      separetely throw the digital thermostats that is installed in each room ?
      Thx a lot

      Comment

      • top brake
        Automated Home Legend
        • Feb 2015
        • 837

        #4
        Originally posted by bazel27 View Post
        thx , for the information.
        i'm planning to install this system for the first time.
        1) If i decide to use , 2 evohome controlles , own for each floor , how it will be shown on phone app ? own location/account needed for each controller ?
        or it will be registred like 2 devices in one location ? if
        2) If i decide to use one evohome controller , and compare some rooms like bedrooms , toilets/bathrooms , temperature setpoint will be the same if i control it from evohome controller , but can i manage it
        separetely throw the digital thermostats that is installed in each room ?
        Thx a lot
        You're getting into quite an advanced configuration with multiple controllers and best advice is to find an experienced evohome specialist that has already gone through the learning curve

        Regarding multiple Evo/RFG100 on the app you will need to register them as different locations, you then have multiple locations on the app which you can easily switch between
        Last edited by top brake; 7 February 2015, 09:35 AM.
        I work for Resideo, posts are personal and my own views.

        Comment

        Working...
        X