Results 1 to 1 of 1

Thread: Idratek FAQ 5 - Modules

  1. #1
    Moderator Gumby's Avatar
    Join Date
    May 2004
    Location
    Gloucestershire
    Posts
    430

    Default Idratek FAQ 5 - Modules

    5. Modules

    5.1 How do I turn off the tell-tale indicator on a PIR unit (for example in a bedroom)?
    Send:
    FA90nnnn440012002002
    (Clear Bit 1 in Module General Mode Byte, where nnnn is module Node ID
    )
    and then Save the profile:
    FA90nnnn440008.

    This should be done with the network disabled and the PIR should not be active at the time (ie the room should be empty).
    Last edited by Gumby; 10th September 2010 at 12:06 AM.
    ----------------------
    www.gumbrell.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •