I am curious what I need to do to request a schema change in the weather report class?
Today its:
Steve; the author of Cumulus added Rain (in mm I believe) which I use. It would be better though to change the Rain part to:
RainM=x.yy
RainI=x.yy
and another ideal add would be relative humidity:
Humidity=xxx.yy
I am currently playing with the weather.report schema with Cumulus testing the Fine Offset and Davis Vantage Vue weather stations.
I've asked the author of a Linux based similiar to Cumulus application to add XaP / weather.report schema or if I could help add XaP to his application.
I'm looking to move the connection(s) over to a sheevaplug currently testing the Linux application on a Seagate Dockstar.
Today its:
weather.report
{
UTC=(Time of report in hh:mm format using utc time zone)
-- mandatory
DATE=(Date of report in YYYYMMDD format)
-- mandatory
WindM=(Value of wind in mph or "Gusty" if gusty)
-- optional
WindK=(Value of wind in kph or "Gusty" if gusty)
-- optional
WindGustsM=(Value of wind gusts in mph)
-- optional
WindGustsK=(Value of wind gusts in kph)
-- optional
WindDirC=(Compas heading of wind N|NE|E|SE|S|SW|W|NW)
-- optional
WindDirD=(Compas heading of wind in degrees)
-- optional
TempC=(Temperature in centigrade)
-- optional
TempF=(Temperature in fahrenheit)
-- optional
DewC=(Dew point in fahrenheit)
-- optional
DewF=(Dew point in fahrenheit)
-- optional
AirPressure=(Air pressure in hPa)
-- optional
Cloud=(Overal cloud cover currently only "Clear Skies")
-- optional
CloudM.X=(Cloud type and height in miles ie "Overcast at 5.4M. X increments on each cloud layer)
-- optional
CloudK.X=(Cloud type and heightin kilometers ie "Overcast at 5.4Km. X increments on each cloud layer)
-- optional
Icon=(The name of the picture to use, icon names from kweather www.kde.org. File names below)
-- optional
Error=(Download errors either "NoData" if last connection failed or "StationNotFound" if ICAO code isn't valid)
-- optional
}
{
UTC=(Time of report in hh:mm format using utc time zone)
-- mandatory
DATE=(Date of report in YYYYMMDD format)
-- mandatory
WindM=(Value of wind in mph or "Gusty" if gusty)
-- optional
WindK=(Value of wind in kph or "Gusty" if gusty)
-- optional
WindGustsM=(Value of wind gusts in mph)
-- optional
WindGustsK=(Value of wind gusts in kph)
-- optional
WindDirC=(Compas heading of wind N|NE|E|SE|S|SW|W|NW)
-- optional
WindDirD=(Compas heading of wind in degrees)
-- optional
TempC=(Temperature in centigrade)
-- optional
TempF=(Temperature in fahrenheit)
-- optional
DewC=(Dew point in fahrenheit)
-- optional
DewF=(Dew point in fahrenheit)
-- optional
AirPressure=(Air pressure in hPa)
-- optional
Cloud=(Overal cloud cover currently only "Clear Skies")
-- optional
CloudM.X=(Cloud type and height in miles ie "Overcast at 5.4M. X increments on each cloud layer)
-- optional
CloudK.X=(Cloud type and heightin kilometers ie "Overcast at 5.4Km. X increments on each cloud layer)
-- optional
Icon=(The name of the picture to use, icon names from kweather www.kde.org. File names below)
-- optional
Error=(Download errors either "NoData" if last connection failed or "StationNotFound" if ICAO code isn't valid)
-- optional
}
RainM=x.yy
RainI=x.yy
and another ideal add would be relative humidity:
Humidity=xxx.yy
I am currently playing with the weather.report schema with Cumulus testing the Fine Offset and Davis Vantage Vue weather stations.
I've asked the author of a Linux based similiar to Cumulus application to add XaP / weather.report schema or if I could help add XaP to his application.
I'm looking to move the connection(s) over to a sheevaplug currently testing the Linux application on a Seagate Dockstar.
Comment