QRI-002 / single DIN module enclosure?

[marcuslee]

Hi All,

Am going to use a QRI-002 to switch 240V feed for heating actuators.

I'm not too knowledgeable on the mains side of things, does anyone know if either of these are suitable to mount and enclose the DIN module?
http://www.screwfix.com/p/mk-sentry-...nclosure/95875
http://www.screwfix.com/p/mk-sentry-...nclosure/21373

[chris_j_hunter]

we went for something larger & more open - to allow more room to bring wires in & arrange them in a way that's easy to trace later ... plus, usually we had more than just the one module in the box ...

many boxes are available, in various sizes - we found some have better closures than others ...

[marcuslee]

we went for something larger & more open - to allow more room to bring wires in & arrange them in a way that's easy to trace later ... plus, usually we had more than just the one module in the box ...

many boxes are available, in various sizes - we found some have better closures than others ...

Thanks Chris - I don't suppose you have time to point out a few of the better ones you've gone with?

[chris_j_hunter]

we're building our house, so we have accounts with local wholesalers & merchants - CEF, Edmundsons, Wades, Newie & Eyre, etc ... and such boxes are standard fayre at such places ... TLC do some that look similar - eg:

http://www.tlc-direct.co.uk/Main_Ind...ded_Boxes_IP56