Help wiring Home Easy HE203

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • gazza_d
    Automated Home Jr Member
    • Oct 2011
    • 21

    Help wiring Home Easy HE203

    This seemed like a simple task

    started to automate lighting and I have bought a Home Easy HE203, but it appears to be a new updated model, and instead of the two terminals on the old version, it has 4 Which are marked L ~ N N and then the two flyleads to the switch.

    The instructions and wiring diagram only have the details in for where there is a power feed and a seperate feed to the light.

    The light I wanting to control only has a a single set of Live, Neutral and earth.

    does anyone know how/it it is possible to cable this up so it works with the light?

    Thanks
  • Vangelis
    Automated Home Guru
    • Sep 2009
    • 131

    #2
    After a quick google. L=Live ~=Dimmable (not sure if you want to use this) N=Neutral N=Switched Neutral? If you unsure then consult an electrician

    Comment

    • jolly1
      Automated Home Jr Member
      • Feb 2011
      • 23

      #3
      L = live
      ~ = switched wire with the switch on becomes live at mains volts

      N = neutral if the second N is is connected to the first N ie test with a meter if ) ohms then is just a loop terminal. If it is switched then this would make the unit double pole ie both ~ and n are disconnected / opened

      Comment

      • shahzaddddd
        Automated Home Lurker
        • Jan 2013
        • 3

        #4
        Gazza did you get this to work? I have the same problem

        Comment

        • rpiggott
          • Feb 2014
          • 1

          #5
          Sorry to drag up such an old thread with my first post but did anyone ever figure this out?

          I have the same problem as gazza - it all looked so easy on the website as well

          Comment

          • martyn.wendon
            Automated Home Jr Member
            • Dec 2013
            • 41

            #6
            The solution was posted by jolly1 above

            L = Live

            ~ = Switched Live

            N = Neutral (the 2 terminals are loop through)

            Instructions from Google at http://media.chbyron.eu/file/pdf/135...newversion.pdf


            Hope that helps!
            Martyn Wendon
            Vesternet
            Check out my Blog!

            Comment

            Working...
            X