Hi Guys,
I am finally getting my Evohome installed tomorrow as I was waiting to have a new hot water tank installed. I have a vented system, and I will be running 10 HR92 valves. I also bought the base kit and the hot water kit. The hot water tank is now under the boiler, so my question is do I need to install separate wireless relay boxes (bdr91) for the boiler and hot water tank, even if they are going to be next to each other?? Is this also quite straight forward for a plumber to install? I am fine with the setup, its just the connection to the boiler and tank I am not too sure about..
Also with the hr92's installed, i have had them setup for a while running with the normal programmer as a test, and I have noticed that they need to be calibrated for each room - the temp seems to be a bit off. Is this usual to have to do this??
Thanks guys. Nick
I am finally getting my Evohome installed tomorrow as I was waiting to have a new hot water tank installed. I have a vented system, and I will be running 10 HR92 valves. I also bought the base kit and the hot water kit. The hot water tank is now under the boiler, so my question is do I need to install separate wireless relay boxes (bdr91) for the boiler and hot water tank, even if they are going to be next to each other?? Is this also quite straight forward for a plumber to install? I am fine with the setup, its just the connection to the boiler and tank I am not too sure about..
Also with the hr92's installed, i have had them setup for a while running with the normal programmer as a test, and I have noticed that they need to be calibrated for each room - the temp seems to be a bit off. Is this usual to have to do this??
Thanks guys. Nick
Comment