Evohome power down

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Mr_Freeze
    Automated Home Jr Member
    • Dec 2015
    • 20

    Evohome power down

    Hi All,
    I'm moving house and need to go in rented for 6-8 weeks.
    I've removed everything from the house and removed batteries from any device with one.

    The main controller is currently sat in its mains cradle keeping the battery charged.
    I don't see anyway of disconnecting the battery so when I move it's going to die.
    What effect will this have on the battery being discharged fo 6-8 weeks?

    Any suggestions please?
  • g6ejd
    Automated Home Guru
    • Oct 2016
    • 153

    #2
    The batteries are 2400mA NiMH standard rechargeable batteries. They will last a couple of hours with no power to the charger. I understand if power is removed it will not clear the memory, so place a piece of plastic or thin card in-between the battery and one of the contact ass they are charged and ready for storage. Ideal charge state for storage is 50%, but I doubt it will make much difference for the time your talking about.

    Comment

    • DBMandrake
      Automated Home Legend
      • Sep 2014
      • 2361

      #3
      Just let it run removed from the charger for about 3 hours - this will drain the battery to about 50%, then remove the batteries. The front panel un-clips quite easily around the edge just with fingernails to give access to the batteries.

      Comment

      • Mr_Freeze
        Automated Home Jr Member
        • Dec 2015
        • 20

        #4
        Thanks guys, I think I had a brain freeze.
        Totally forgot the front clips off to access the batteries.

        Comment

        Working...
        X