It's getting stranger in that the 10.7 sensor which became 10.9 is now back to 10.7. But the other sensor that was sat at 0.0 jumped to 11.1 at mid night and has stayed there. Set point has stayed at 22C all the time.
I foolishly haven't been tracking those Zone Relay devices which I couldn't corelate to any of my zones and which I felt were always sat at 200. Done that now. Lets see if the relay values change when I spot a change in these Zone sensor values. It's a pity that I cannot directly plot Switch and Temperature devices on the same graph in Domoticz.
Anyway, back to my oscillating temperature sensor issue. Anything else I should try to work out what is causing the issue. In the Child Bed zone the unused Sensor hasn't even turned up on Domoticz and in the Lounge the unused Sensor has values higher than the top and bottom of the Lounge oscillations.
I foolishly haven't been tracking those Zone Relay devices which I couldn't corelate to any of my zones and which I felt were always sat at 200. Done that now. Lets see if the relay values change when I spot a change in these Zone sensor values. It's a pity that I cannot directly plot Switch and Temperature devices on the same graph in Domoticz.
Anyway, back to my oscillating temperature sensor issue. Anything else I should try to work out what is causing the issue. In the Child Bed zone the unused Sensor hasn't even turned up on Domoticz and in the Lounge the unused Sensor has values higher than the top and bottom of the Lounge oscillations.
Comment