Either the BDR91 isn't opening/closing properly. Or the boiler logic that looks for the open/close has failed. Or there's a dodgy connection at one end of the wire connecting the two (or the wiring centre (posh name for junction box) between the two, if you have one).
My hunch is that a dodgy connection is the most probable. Has anyone moved anything in the general vicinity of the BDR91 or boiler wiring centre or boiler itself recently that might have nudged the cable connecting them?
My hunch is that a dodgy connection is the most probable. Has anyone moved anything in the general vicinity of the BDR91 or boiler wiring centre or boiler itself recently that might have nudged the cable connecting them?
Comment