I don't use Domoticz, but have you tried using usbip instead of ser2net? This will then give you a virtual usb device on your client. I use a similar approach with my fake HGI80 linked to openHAB.
HGI80 hot water termperature no longer showing in domoticz
Collapse
X
-
Originally posted by paulockenden View PostDon't know how, but I've got DWH showing, but it only registers zero degrees for the temperature.
I know the CS92 is working fine because the controller shows the correct temp.
P.
Nearly identical to my symptoms. Try unplugging the HGI80 and plugging it back in (or powering off the rasp pi). Rebooting not enough.
Mine had got into a state where it would not transmit any more and the latest code doesn't listen to the CS92 but rather sends messages to the controller to get the temperature.
I think actually listening to the CS92 directly (as it used to) would be better, but the problem is the messages aren't to or from the controller - the controller just knows the device id to listen to. So there doesn't appear to be a way (for domoticz) to know which CS92 is the right one in the case that there is more than one installation in range...
Comment
-
Comment