Multiple source - multiple receivers - selectable channels?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • dik
    Automated Home Lurker
    • May 2006
    • 2

    Multiple source - multiple receivers - selectable channels?

    Okay I`m a noobie here so please bare with me.

    I`m looking for a solution to my home media setup.

    I have a cellar which has Sky+, a CCTV system and a Meedio PC and maybe other devices in the future.

    I then have multiple televisions around the house, each of which is able to remotely control and view any of the three sources without affecting the other viewers. (using a Loftbox and IRBlasters/Receivers over RF - yeah I know!)

    Assuming all 3 devices can produce a scart or svideo output can I use the KAT5 system to supply these 3 sources to multiple rooms AND have each room control the devices independantly

    i.e. room 1 watching the SKY+, room 2 watching meedio and room 3 checking out the cctv, all over S-video or scart BUT NOT RF!!! LOL

    I already have cat5 cabling to all rooms but only 1 cable per tv in some cases.

    Thanks very much.


    Richard
  • dik
    Automated Home Lurker
    • May 2006
    • 2

    #2
    Re: Multiple source - multiple receivers - selectable channe

    Doh, finally found a post regarding exactly this.. Sorry guys

    So my next question is... Whens the switcher coming? and is there going to be a special 'package deal' you know switcher, 2no TX, 2no RX, etc..

    Cheers all

    Comment

    Working...
    X