Originally posted by chris_j_hunter
View Post
Regarding how's it going, I think it's been relatively smooth in terms of the system was pre-configured before onsite commissioning (more or less). The only thing which we need to go back to the drawing board on now is:
- implementing dual IPDs given we've seen how fatal it is if the IPD goes out and what it'll do to the site
- better protection for the Idratek cabling. Presently it's within riser cupboards in velcro'ed bundles, however the riser cupboard bundles will be shared with normal CATV, Network Cat5 cables in future, but again having seen how critical Idratek cabling is, I'm now going to go back to the drawing board and put more protective/segregation methods for the cabling.
- also some ways to go with putting in the reflex programming, make sure we know the system better with regards to interrogation, and health, and generally knowing all the finer points of it all. Also to begin making the system more customised (DFPH menus and the like).
Other than that, it seems pretty robust like you said, and I'm hoping it'll remain that way!
Comment