We have just completed trials of a new adapter for the micro modules. This will enable them to be fitted into a din rail cabinet. But not only that you will be able to clip on to the front of the adapter up to 2 momentary switches or a blanking plate. Photos will follow tomorrow.
Din rail adapter for Xanura and Marmitek micro modules
Collapse
X
-
Din rail adapter for Xanura and Marmitek micro modules
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
Renovation Spain BlogTags: None
-
-
Sounds interesting Toscal.
M.
-
-
Here are some photos of the adapter and of the switch.
First one shows micro module in adapter, with an LD11 for size comparison. Second one shows the half width momentary switch in place. We don't have any half width blanking plates at the moment.
The wires, for the switch are held by a spring clip system which is rated to 230V 10A. We can also do Shutter( curtain/blind style) switches, these are the same as the momentary switches but have arrows on them.
Price wise the adapter on its own will go on sale for about 16.75 euros including spanish VAT (IVA)Last edited by toscal; 16 December 2008, 06:52 PM.IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
Renovation Spain Blog
Comment
-
Comment