Activity Stream

I would definitely contact Resideo and get them to push the latest to you. Even if you done get too excited with the Hit and Miss smart weather...

Not rolled out to me. Just checked and I am on Firmware. 02.00.17.03 Wifi. 02.00.17.00

Are you saying this hasn't been rolled out yet? I am sure us Beta users have seen two winters with the latest version.

I agree, it is the one feature of the new firmware that I may find useful, but I will have to wait for the update to try it.

Got it sorted. I had to do a full reset of the RF unit on the boiler. Turned out the guy who installed it had tried to connect the evohome to the...

Atleast a variable Eco mode is now a reality. A fixed -3C was the most useless feature Evohome had.

What we were originally after was the option to have multiple schedules ie winter, spring summer, as all my 12 zones differ in "feel" depending upon...

From what I read it seems to me the best thing to do is ignore Eco mode and if you want to adjust temperature up or down, do so in the app for...

I still have the old firmware and can confirm that, with eco mode active, I can set an override for a zone and the temperature will be as set. Ie it...

Ah just tried adjusting a zone on the main controller and set it to 18 and pressed enter and it immediately shows as 17.

Although I have used Eco mode since first introduced, as it always dropped the temps by -3c, I tended to only use when quite warm outside and so...

My Evotouch was installed in June 2016. Prior to 24th Feb this year it was on version 02.00.17.03 and that supported Eco mode; it allowed an override...

The temperate in Eco/Boost is adjustable + or -,but this for all zones. Go settings/quick actions/eco boost to adjust ,I have mine set to -1.5

Yep have also noticed this as Eco set to -1C on my system and if the current reading of a room is 18 and I want it to go to 19 I have to input 20 on...

But that's not how it has been for the past 5 years! This has only started since my Evotouch was updated QUOTE] I think you have answered your...

But that's not how it has been for the past 5 years! This has only started since my Evotouch was updated to 02.00.19.33. After further testing I...

Guess you answered this yourself? Eco mode subtracts 3 degrees from the set temperature, unless this puts the zone below the minimum. I agree that...

That reset does not last long and you have to do it again. It’s a pain. I don’t bother now as it is a worthless exercise. My panel starts bleeping...

The reason I've gotten into the habit of quoting Baud rates is because its relevant for the HGI80, the NanoCUL, RfBee, CUL etc. So it's a habit. ...

Any device that is designed to take rechargeable batteries should NEVER have non rechargeable batteries put in. Infact I tend to say, don't even put...

Yes, mine beeps every 60 seconds or so when off the mount.

It’s supposed to beep when it loses power, isn’t it? Mine always has done, from new.

38400 baud

The evohome system is made of multiple radio transmitters. They're all trying to behave like wireless UARTs at 28400 baud. Unfortunately they all...

Quick comment. The SSM is a direct USB interface, unlike the Nano which uses a atmega328p internal UART to talk to a USB interface chip. The...

have you e-mailed Mile at letsAutomate..a very very helpful and nice chap.

Do a battery reset as set out in this thread https://www.automatedhome.co.uk/vbulletin/showthread.php?6347-Control-Panel-Battery. Made a big...

Totally agree, hence my point about a LLH making everything behave much more predictably. The LLH handles the minimum flow rates through the boiler,...

Lots of discussion threads on here about this to read through if you have a browse... But in summary, the sensor in the HR92 will always read a...