Activity Stream

Hi all, I am away and I have set the heating at 10 degrees until I'm back. This has been working perfectly for the past 10 days, house took a few...

I have been using Duracell Industrial batteries for some years, and have found them to work well with HR92s. I find some applications are voltage...

Is there a way to turn an individual HR92 off other than removing it and turning in the black clogged wheel? There is a setting if you turn the top...

Hi All, Sorry if I'm missing something obvious, but how is it "best" to represent a blind / Curtains / Roller doors in Cortex? I've recently...

My HR92s will be 7 years old this year. Are the current new HR92s the same as those of 7 years ago? I.e. no updates to them. It may be me but I think...

Hi there, I would like to get your opinion related to this issue I have. My ACV heating system is times to times getting an error message "B30"...

Hi all, Had an Evohome zoned system for several years which works really well. Had one of these Oregon weather stations things to tell us actual...

Some months ago I took my Control Panel off it’s mount and noticed that within a couple of minutes it hung on me with the display saying the...

Hi I've been battling with my Evohome install for a while where I've two rooms both with two radiators in each, where in both cases the second...

My IFTTT connection stopped working 2:14am this morning and I can't reconnect it. Anyone else?

Does anyone know if a DT92E transmits its battery status at any time, and if it does, is it encoded the same way as other devices such as HR91/2?...

Looking for thermostats for other rooms in my house to connect to my evohome system. I currently just have the main controller and HR92's on each...

Having just managed to get my hands on an HM80, I was keen to find out how it worked with Evohome. I am also trying to see what the radio comms...

I had an unpleasant surprise when I removed an HR92 head and adapter yesterday - water started to come out, as did the valve pin. Replacing, and...

Hi all. I’m very happy I found this forum! And I’m looking for some advice please. I currently have an opentherm compatible gas combi boiler (heating...

Hi All, first post! I have a bit of an odd heating system which I would like to upgrade with smart controls but I'm struggling to figure out which...

Anyone managed to connect Evohome to Somfy Tahoma?

Bear with me. Hopefully I'm worrying about nothing. Have had evohome for a few years but a new kitchen extension with UFH has left me confused. ...

Good afternoon all, Apologies for going around the buoy again on an already discussed topic. I have a Viessmann Vitodens 111-W boiler,...

I have been using Duracell Industrial batteries for some years, and have found them to work well with HR92s. I find some applications are voltage...

I am looking to do what I thought would have a quite simple process in moving a HR92 from one zone to another but saw an old post on here that was...

A while ago I converted by DHW CS92 sensor base to using a wired connection. I just branched out my Evohome wall mount's PSU and stepped the voltage...

Hi, Just got a DTS92E for my evohome system to help control the dining room temperature. Just now I only have HR92 rad valves fitted in every room...

Hi there, One thing I find useful when the cold weather comes in is to monitor the overnight temperatures of my rooms. I want them to be set low...

Since i installed evohome on an old system were only two thermostatic rad valves were fitted the system can get a bit noisy when all HR92,s have...

Ok so have had my Wiser system for some time and have found it to be really good. I have just bought some additional radiator valves and wondered if...

We have Evohome working with a Y-plan system, with an old vented hot water cylinder and an old boiler on an open vented heating system. There are...

I have just had a Chameleon IHD6 Smart meter installed. It is a CAD (Consumer Access Device) which I can connect to my wifi and it gets given an ip...

I am in my second winter of using evohome, I have only just discovered that open window/door function is enabled by default. This be came apparent...

I'm still using X10, I guess you could say my HA setup it retro! ;) I have just migrated my home automation server from WinXP with HouseBot to...