Activity Stream

It’s supposed to beep when it loses power, isn’t it? Mine always has done, from new.

38400 baud

The evohome system is made of multiple radio transmitters. They're all trying to behave like wireless UARTs at 28400 baud. Unfortunately they all...

Quick comment. The SSM is a direct USB interface, unlike the Nano which uses a atmega328p internal UART to talk to a USB interface chip. The...

have you e-mailed Mile at letsAutomate..a very very helpful and nice chap.

Do a battery reset as set out in this thread https://www.automatedhome.co.uk/vbulletin/showthread.php?6347-Control-Panel-Battery. Made a big...

Totally agree, hence my point about a LLH making everything behave much more predictably. The LLH handles the minimum flow rates through the boiler,...

Lots of discussion threads on here about this to read through if you have a browse... But in summary, the sensor in the HR92 will always read a...

Don't use non-rechargeable batteries (Alkaline or Lithium) in the Evotouch. Definitely not when it is on the mount as it will try to charge them, and...

True, but besides heat loss, you also need to check what is the heat demand going to be like. When you have zoned systems like Evohome, very rarely...

Hi Did they go ? I’d love them Can’t Collect though, as I am in Jersey But I have a UK address I can give for postage Thanks

The boiler size isn't dictated by the UFH and / or number of radiators, though. It's dictated by the heat loss of the house (in the depths of...

Either that, derate the boiler. I too had no end of pain with my 38KW boiler that was sized for radiators but then when we put in UFH, the heating...

Do you have an Automatic Bypass Valve? It needs to be set correctly to maintain the minimum flow through the boiler. Honestly, I would advise just...

The Panel may well work with non rechargeable batteries in. I must try it! But make sure you take them out when you put the panel back on it’s mount....

Make sure the USB port has been correctly assigned to the SSM first. Then add the Hardware to Domoticz by choosing Evohome USB with a 115200 baud...

I was trying to be helpful because I thought the USB standard included orientation - I'm wiser now. The process was: plug-in the dongle (the...

The way the device plugs into your USB port depends entirely on how the female USB port is oriented on the host device. There is no standard. So...

Thanks for the quick delivery. A couple of questions relating to its use in Domoticz: - clicking the <Relay> or <Bind Temp Sensor> "button"...

I've ordered the components for the next batch of devices. I expect to have everything by mid May and hope to release stock within a few days. ...

We had a few test devices that have been running for weeks and months continuously. So you'll be fine.

Huge thanks, although I eventually got my nanoCUL working it still regularly failed to transmit properly, so far today no errors at all.

Excellent, it's taken many years to get to this point.

Got mine and working perfectly with HA!

thanks very much :)

Now that these are starting to go out into the wild, I'll hook us up on to another thread to make sure people get up and running quickly.

There is a Notify me when product is back in stock) link against the Out of Stock icon. How do I tell the difference between the user names here and...

That’s one possible problem out of the way! My new Intergas is working fine. Domestic Hot Water is OK now I have reduced the mains water pressure...