Activity Stream

Cortex W10 was a comprehensive re-write of the underlying code in order to provide compatibility with Windows 10. So it was initially more a...

stick with it, is my advice ... Chris

Bruce is one of the experts on the hardware side - he is an authoritative source of information. TL;DR: yes

The dongle referred to above is the NanoCUL. The new platform is basically an upgrade to the NanoCUL. Both will work with Home Assistant or any other...

We won't have a lot of news, until things are good enough to release into the wild. A LOT of testing is going on in the background. If you are happy...

I'd guessed the temps came from V1 because of the improvement in accuracy since my move from SmartThings. Before I jump in and buy anything, would...

Hi Bruce, any news?

My Eco RF 36 doesn't have a clock but has Eco mode and I assumed that it goes by relative time rather than an absolute reading.

Thanks. It is now. It wasn’t earlier. It’s been very slow over the last few days too.

Working for me but it is much slower to open and complete any manual adjustments made to a zone temperature.

I've just logged in ok, app seems to be working fine.

App broken yet again. Can’t login. This is getting ridiculous now the amount of down time they have had. It’s not just me. It’s all over Twitter...

I tend to agree. But if they limit your choices to a cheap boiler and basic installer then perhaps they may agree to pay you the cost of those quotes...

I'd suspect with a grant you'll be very limited to your choices, and the quality of work you will probably get @DBMandrake won't to be up the...

Thanks for the reply, I won't bother trying to fix it at my end for now.

Pleased to hear the boiler’s clock has no bearing on the mode setting presumably only if using an external system. If a user uses the programming...

In ECO mode my Intergas boiler simply keeps track of when DHW is required, so if the hot tap was run at about 8:00 am over the previous 2-3 days, the...

But I have OpenTherm connected and the Manual says to use Eco mode with OpenTherm in order for OpenTherm to learn. I wonder if anybody has come up...

The boiler DHW operation is completely independent from Evohome, Evohome doesn’t provide the time. The Eco learning is supposed to be based on...

Same problems here. Just checked last nights logs and multiple timeout errors. Been going on for several weeks now. Alexa hit and miss as well.

Same here. It's been on and off for several days now, random login failures, incorrect zone data, etc. Strangely in-house I appear to have issues as...

It is of course possible that it is still in learning mode. I did not notice it as much early this morning before any heat or hot water was needed. I...

I have found of late that the app is much slower to load in, changes to zones effected on the app are sluggish to complete and over the last few days...

Their servers have been playing up for the last day or so. My Domoticz installation has been reporting timeout and other errors all day.

My boiler is set to ECO mode too.

Is anyone having any problems at the moment? I’m receiving an email every time I try to do a zone or system change. I’m in the middle of moving my...

The DHW is set to ECO mode. I would understand it if it was set as you say.

It sounds like you have the DHW 'keep hot' function selected, so the boiler will fire occasionaly to maintain DHW temperature between demands. The...