Activity Stream

It was The Evohome Shop who produced it and hopefully they will add it to this post.

I have exactly the same messages and problems Was the guide ever found or the link re published?

The HR92 can be used without a controller

I wonder that as well. Can HR92 be used in standalone mode without the controller? Wiser's one can't, so any Evohome user would not be able to do an...

With a 60Kw system I would go for 2*30Kw and load sharing. Apart from deep winter you will find that the demand is below 30Kw so only need 1 boiler...

I'm reliably informed that it will. No idea how it aggregates the demands. I'd still like to hear from someone who's done it. Correct. Why...

I accidentally deleted my message when trying to edit... Anyway, there is also Wiser that has extenders and is cheaper than even Evohome.

I'm guessing you are talking Heat Genius? Don't think it'll work out much more expensive, and has repeater function, which is very attractive. ...

Is binding two controllers to a single opentherm bridge even supported ? If so would it just use the higher heat demand of the two demands being sent...

Thanks Karam. All I am getting is the same text displayed. I've probably made a simple error!

I don't mind a big expense now, if it is going to work well for the next 10 years. I'm beginning to wonder if it will Same; but I want to be...

I have stuck with the 'one zone per floor' approach, controlled by Evohome, rather than universal HR92s because: (a) 32 HR92s would cost me about...

This is great - thanks for letting me know your experience. At the moment it's a complete toss up between going 'full Evohome' (HR92 on every rad...

I have Evohome but I don't use HR92s, so my experience is not directly relevant to you. However, I do have a GB162 65kW boiler in a three storey...

Thanks dty. Low loss header certinaly. re. Separate circuits; do you mean this so that the flow out of the boiler splits relatively early,...

You need to include the name of the parent logic gate object eg. <General Logic.HW on and calling for heat=$1> would give the status in a True/False...

If you’re having HR92s on all rads (or deliberately leaving some open such as towel rails to act as a bypass), then you don’t need the zone valves at...

This is a problem that has been reported before - a forum search should turn up plenty of previous discussion about it. I've personally had it...

Really interesting. I recommended Wiser to a friend of mine simply because of the drop over programmer installation... For me the central...

My set up is a combi boiler without any plans for wet UFH, so the reasons above would not really sway me, but I can certainly see the advantage of...

Hi Frank, I came up with a less complicated solution (I hope!), but untested so far. I purchased a Xpelair Humidi/Timer Extract Fan (XPEC4HTR)...

It should definitely be possible. Is the project now complete? How did you get on? Frank

Sorry you've not had an answer - it's seems a little quiet on here at times. I use a SmartThings hub. SmartThings is good if you have a lot of...

I'm certainly interested in your decision making and what you found. I nearly bought Wiser but settled on Evohome in the end. I was concerned about...

I’ve installed 4 Evohome systems... my own, another family member, a friend and a person who somehow heard I had some knowledge and asked me to help...