Activity Stream

The bug that keeps the batteries within the control panel topped up has not been implemented. So by the time you need the backup of the batteries,...

Thanks. Will have a look.

Try this link and also within the thread Anniesboy original link...

Yes I also have a combi and whilst brilliant in many ways a bath does throw the heating !! I’ve got used to that so tend to have wide heat up times...

I had it set to normal. It had actually been working fine for a for a couple of weeks, just that for some reason it went wrong last night. Could be...

Have you got it set to normal or partial ? I found partial did have that sort of impact whereas normal really seems to work well for my property 😁

Cold Weather and just remembered why I disabled 'advanced load scaling' last year, went up to bed last night and all the bedrooms were freezing, well...

Wow, Electric zone was introduced almost 4 years ago now.

Must be old stock. Both of my new controllers had latest firmware pre-installed.

Not sure about that, I bought one two weeks ago and the firmware didn't have Electric Heating zone type support, had to contact support and they...

Cheers, bought a DST92E and will see how it goes before buying more for the other rooms

Nope, no difference. I've used both types - usually the one with just the thermostat but in one case I bought the pack which includes the relay as...

All mine bought from 5 years ago up until one replacement last year have firmware 1.01 as reported when the batteries are inserted.

My DT92E relay set came with the DTS92E Thermostat inside it.

Just curious if there is any difference between them apart from the DT92E coming with the relay.

I bought one on Saturday. Firmware is unchanged, though it looks a little different on the front - there is a Honeywell Home badge and it is now...

We need someone who has bought an extremely recent set to chime in. I understand that evohome controllers are now being sold with the latest firmware...

If you know someone (think eBay) who needs a BDR91, then buying the set often works out cheaper.

I think that's what the HGI80 was originally intended for.

I was purely intending for now to use this Motor Control object (which I've chosen the roller blind icon for in plan view) for local control. Ie, the...

Mine are about 4 to 5 year old and are all firmware 1.01

As said 1.01.

On my HR80, when I first put the batteries in, the display shows me the firmware version. Does the HR92 not do that?

Nothing obvious but if I lift the display panel it reads “HR92UK 1.01” Then “1436 5 ST3” I imagine 1.01 is it’s firmware. If anybody in the forum...

If the Viessmann Vitodens 111-W boiler's HW can be controlled using an external programmer, then it can be controlled using a relay. So does it? If...

Why not two Evohome controllers, for each end of the house? Then you can decide if you want to add radiators controls or not at a later point. For...

Installed Evohome a month ago. Found out about upgrade thanks to this site, and very relieved/impressed with the new software especially HW priority!...