Conversation Between DBMandrake and edhodges1984

1 Visitor Messages

  1. Hi,
    Iím sorry to bother you but Iím after a little advice with regards to wiring my mechanical stat in series with the BDR91.
    Iím getting very irregular/slow updates from the CS92 which is causing temp overshoots, something I am concerned about as I have an unvented cylinder.
    I know the theory behind it - and am familiar with the wiring of the system but I donít really know where to start as I donít want to cause myself problems which could be costly.

    I have an s plan system and a 2 wire mechanical stat with com and 1 wires (I guess 1 is. NC)

    Iíd appreciate any advice you could give me.

    Many thanks

Showing Visitor Messages 1 to 1 of 1