We need someone who has bought an extremely recent set to chime in. I understand that evohome controllers are now being sold with the latest firmware...
Does the HR92 display it's firmware version anywhere, either on a sticker or on start-up. IMHO Resideo actually do not handle part numbers very well,...
All older kit only sent a low battery warning e.g. HR80, DT92 etc. The newer kit HR92, T87 sends battery level. A few of us have a special box of low...
@kevinsmart any examples showing Evohome OT providing the difference between a CH and DHW modes? Mind you, I am looking at the eBUS side of my boiler...
What might happen if I just used the ON output of the HM80 on a normal 2 port zone valve and have the flow sensor attached to the output pipe of the...
Any view on using the HM80 in place of my BDR91? I.e. just using the ON signal to open my current 2 port zone valve but using the HM80 to control the...
A while ago I converted by DHW CS92 sensor base to using a wired connection. I just branched out my Evohome wall mount's PSU and stepped the voltage...
This is why I am not a massive fan of the Frost Protection settings in Evohome. By the time a room in the house has reached 5C, pipes under the floor...
If I use a V5433 3-way rotary valve, and the valve is completely closed, does the Flow from the boiler just form a direct loop with the Return? Or is...
Find latest posts