Hi
I am about 2 weeks now using my new Evohome I have 8 Rads all with HR92 Valves one bypass rad I had 3 Zone Valves but removed the heads and locked them open basically they are gone
All Rads are Single Zone Except for Kitchen which has 2 rads
Kitchen and Living room I use Round Thermostats as Temp sensors and other zones use HR92 as sensor
SO I only have one BDR bound as a Boiler relay I have no Stored Hot Water in Evo All is working very well Temp control is spot on I have optimum start and stop enabled
Only issue is noise of HR92 Valves in Bedrooms
I have cycle rate set to 6 and min on time 1 min I have a Worcester Bosch 24ri Open Vent Boiler is anyone here using one of these Boilers if so what min on time do you use
Also I have a modulating Pump which is controlled from boiler which has an over run function Should I leave this modulating or use fixed speed
Thanks for Help
mylesm
I am about 2 weeks now using my new Evohome I have 8 Rads all with HR92 Valves one bypass rad I had 3 Zone Valves but removed the heads and locked them open basically they are gone
All Rads are Single Zone Except for Kitchen which has 2 rads
Kitchen and Living room I use Round Thermostats as Temp sensors and other zones use HR92 as sensor
SO I only have one BDR bound as a Boiler relay I have no Stored Hot Water in Evo All is working very well Temp control is spot on I have optimum start and stop enabled
Only issue is noise of HR92 Valves in Bedrooms
I have cycle rate set to 6 and min on time 1 min I have a Worcester Bosch 24ri Open Vent Boiler is anyone here using one of these Boilers if so what min on time do you use
Also I have a modulating Pump which is controlled from boiler which has an over run function Should I leave this modulating or use fixed speed
Thanks for Help
mylesm
Comment