Newish Installation trouble with one HR92

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • didsbury
    Automated Home Jr Member
    • Nov 2018
    • 10

    Newish Installation trouble with one HR92

    As above I had a new installation of Evohome in February this year. It’s for heat only. There are 12 zones and each has only one HR92.

    Generally, I’ve been very happy with it. However, the lounge HR92 has now failed twice in the last fortnight. The valve has got 2 bars of battery displayed and it is displaying the temperature scheduled. The radiator and the room are cold. If I turn the dial all the way up to 35C or down to 6C, the motor does not turn. I have removed and reinserted the batteries and rebound and it is working again.

    I had the same problem on two other radiators in the first week and I performed the same procedure. Since then they have worked flawlessly.
    Any ideas?
  • didsbury
    Automated Home Jr Member
    • Nov 2018
    • 10

    #2
    Argh!

    The lights might be on but there isn't necessarily anyone home. I’ve just read the thread currently below mine “Evohome HR92 lights on but not working..”

    and it addresses the same issue.

    I’ll monitor the locking mechanism and switch my brain to maximum before I post again.

    Comment

    Working...
    X