HV Analogue Input Expander
Hi All
Im thinking of making an Analogue Input Expander which would connect to the Homevision Expansion Bus like the HV I/O Expander....Temp sensors such as the LM34 ....LM335Z etc could be connected to it.....There would be 4 analogue inputs available.......
Anyone interested in this ???
Thanks
Frank
Re: HV Analogue Input Expander
Quote:
Originally Posted by FrankMcAlinden
Anyone interested in this ???
I'm absolutely interested in this...
Although, I should point out that I have already emailed you asking if you digital sensor could do the same...
Put me down for one of the first units :-)
Cheers
Eddie
Re: HV Analogue Input Expander
Hi Eddie
Well it appears that your the only person interested in a cheap analogue device for Homevision ....so can only assume that its not a required piece of kit or most hv users have already got some form of temp monitoring...
I have purchased some i2c analogue chips and some lm355 temp sensors so when i get some time i will have a play and *if* i do get it working i will make a second prototype and send it off to you to try out.......Im quite busy at the moment so it will be several weeks before i get a chance to play........
Thanks for replying
Frank
Re: HV Analogue Input Expander
Quote:
Originally Posted by FrankMcAlinden
Hi Eddie
Well it appears that your the only person interested in a cheap analogue device for Homevision ....so can only assume that its not a required piece of kit or most hv users have already got some form of temp monitoring...
Yeah, I think thats the problem really... I'm pretty late to the homevision table, most people have got their temerature monitoring sorted out.
Thanks anyway
Eddie
Re: HV Analogue Input Expander
Hi Guys
Those Homevision Users who are interested in a temp module , there are a couple of Homevision Users currently doing some work on this so keep an eye on the Homevision Forum if interested...
HTH
Frank
Re: HV Analogue Input Expander
An Analogue Input Expander would be an excellent idea.
Re: HV Analogue Input Expander
Apologises Toscal
This thread was started initially with temp monitoing in mind....The device the hv users are actually working on is a digital temp device(dallas sensors) .....sorry ...
Now if there were some analogue moisture sensors(for the garden) available out there i would be tempted to have a go at designing a pic based analogue input module for Homevision....
Frank
Re: HV Analogue Input Expander
Have a look at this http://www.rotronic.co.uk/ucm/home/p...ID-43-range-17
Don't know if this is what you are thinking of. Its the only one I know of that has an analogue output.
Re: HV Analogue Input Expander
Hi Toscal
Being an industrial product i would imagine they would be a little on the expensive side....
Im toying with the idea of using these the only issue is the moisture board is one wire control...
http://www.hobby-boards.com/catalog/...products_id=45
Thanks
Frank
Re: HV Analogue Input Expander
Quote:
Originally Posted by FrankMcAlinden
Apologises Toscal
This thread was started initially with temp monitoing in mind....The device the hv users are actually working on is a digital temp device(dallas sensors) .....sorry ...
This is just what I'm after...
Ay chance of a link to this thread or something Frank?
Cheers
Ed.