Should I maybe reset everything? Please do not tell me so, right yesterday I had to reconfigure everything.
Post a picture of your Settings screen
Mazzy, Do you have an outside temp in the top left next to the connected icon? AtM
Attachment 1682
Attachment 1683
Attachment 1684
This is my current situation and according all the comments around seems very weird
Check you have defined your location (address) correctly on the honeywell total connect site - without that it can't produce the weather info.
Hi all,
Just enrolled here. Living in the Netherlands and thanks to this forum I got aware of the possibility to get a beta firmware installed with improved Heatpump control.
Since two weeks I am the owner of an hybrid heatpump (Remeha Elga Ace 6kW) and my search for improved “co-operation” between Evohome and a heatpump brought me here.
At the moment I have one question;
The new firmware has the option to add a heatpump, but it won’t allow to connect my BDR91 relais for it. From a (new?) manual of Evohome that I found, I understood I need a BDR91T relais. Seems to make sense, since I would expect that a Heatpump relais should at least have two contacts; one to heat and one to cool.
However I also found this website, from which I understand that from a specific production date on the BDR91 is the same as the BDR91T. Since my BDR91 relais is newer (date code end of 2019), I would expect that it is the same/similar to the BDR91T.
Anyone knows what’s the issue here?
Will there be a new BDR91T relais, or is this an issue for the beta firmware?
Edited: I just found this post as well. This tells there is (or will be) a new relais. Curious when it will be better available.