Search:

I saw this thread when it started and have just come across it again. Pleased to see it has some updates.

@zxdavb, I'd love to know if you noticed any benefits or got the improvements you hoped...

Thanks all

Yes, I meant well above setpoint :)

I'll switch over the HR92 and monitor it, and look at the rebind.

Hi

One of my zones has been calling for 100% heat this morning, despite the room temperature being well below set point. I set all zones to Off over 30 minutes ago but the radiator is still on,...

Thank you both :)

Super comprehensive reply as always DBMandrake :thumbsup:

It does but as I understand it, it is only a small one to protect the boiler itself

I called Worcester and they advised I'd need an ADV in my situation, which corresponds with the advise on here...

Sorry, I should have said. It's a combi - Worcester Greenstar 32CDi Compact
Cheers

Hi all

I know there may be better suited forums for this question but I like this one, and the topic of ABVs does quite often come up on here.

I need to install an ABV to reduce the system...

Thank you all.

I did try a full reset but no luck.

I'll return to the retailer and see what they say.

For everything else I have had problems with in the past though, I've always cut out...

Hi all

I noticed one of my rooms was not switching on in the mornings (evenings were okay however). On closer look, the battery status on the HR92 display showed zero bars. There was no 'low...

Thanks for the setup videos Richard :)

On the last HR92 I just added, (new zone, single radiator) I didn't see the Sync message appear. It displayed on all the other zones.

It seems to be...

Ordered

Thanks:D

Hi

Just an update.

I called the helpful Worcester technical support line this morning.

I said about it switching off with error 349 when a cold radiator is switched on, and the fact that it...

Hi Ian

I had the whole system (new boiler and rads) installed about 8 months ago. They're all hot on the bottom so I'm hoping there's nothing lurking in them :S

Good thinking though..

Thanks

Hi Mandrake

Thank you again for your great reply.

When the 5 radiators were on, the two manual ones were on number 1 but got hot pretty quickly, so I think the pins were quite well open. The...

Hi Ian

Thanks for the information. Makes me a bit happier to know it is not just me! My Anti-fast cycle flow temperature is set to the default of 6 degrees K. I assumed that was Kelvin but that...

Hi Mandrake

That's great info - thank you!

I've not re-balanced the radiators yet since my new IR thermometer did not arrive until today. I've also not yet tried changing the pump speed - it...

Wow! Thank you everyone for the invaluable tips and advise! That makes much more sense now - I'll buy an IR sensor and have another go :)

I had been wondering about reducing the pump speed on the...

Hi there

I have been trying to balance my radiators without much luck, so I am hoping someone can help tell me what I am doing wrong :s

I have the Evohome system with 10 radiators - six with...

Hi Rameses

I'd too be very interested in the trade in please.

Bought the whole kit including the mobile access kit last summer and a month or two later the new WiFi controller came out. I...