Search:

I think I got them from Li at CBus shop / laser. Might be worth giving him a call?

Hi, sorry the dimmers are sold. I do have the PCI but that's probably of no interest?

Anyone interested in the following:

1 x C-Bus RS232 PCI DIN mount interface (£390 new) £200
1 x C-Bus plug adapter dimmer(5812D3L1EA) – (possibly x2 but can’t find the other at the moment) £50
...

Yes there is a lot to read up on - but for me, that's half the fun of it :)

The smart apps are components of the ST system - pieces of code that run on ST. There are two ways to install them -...

I'd also recommend a couple of must-have smart apps for ST:

1) Rule Machine - a VERY capable custom rule creator - basically get ST to do pretty much anything based on a number of triggers. Highly...

I have three Pi's now and have bought kit and separately - for this project I bought the bits separately as it's about £5 ish cheaper that way and I don't need yet another HDMI cable etc. Just Board,...

go for it! It's fun :)

Hi All,

If you find any issues, omissions or mistakes in my guide, please let me know - it's the first time I've created a guide like this!

There's also the SmartThings forum where I got most...

Thanks - good points :)

I had already thought to leave the speakers, even though they're pretty decent and reasonably expensive. Replacing with cheaper ones probably isn't worth it as I'm not sure...

So a bitter sweet time - have recently sold my fully HA enabled house (Comfort, CBus, Cat5e everywhere, audio/video distribution, CCTV etc). I'll miss so much of it but had to move on. Unfortunately...

Ah - I see that the app has a demo mode - so each Evohome controller would appear as a separate location i.e. you can't add a location and pick zones from multiple evohome controllers I guess?
...

Thanks for that - I'd rather not have multiple rooms in one zone if I can help it - that's something I always struggled with on the Hometronic - I really like to have very granular control with means...

Hi,

I have a current Hometronic system supplied by Sensible Heat, running 16 zones with the following kit:

1 x Hometronic manager
1 x HGi80
16 x HR80 (some doubled up in a zone)
1 x UFH...

I'm just about to order a load of LED lamps from Australia - that work with CBus. They now have a 8W lamp in warm white 3000K - 0-100% dimming, no flicker, jumping in levels etc like some others I've...

Hi Neil,

Did you get anywhere with this? I just posted a nearly identical post to the mailing list looking for similar drivers/LED's!

Cheers,

Paul.

Yes - I saw that yesterday and bought a set of IR Anywhere modules and their IR commander - been setting them up today.

Excellent bits of kit - the IR over IP works extremely well and seems to...

Has anyone got one of Keene's IR commander boxes and/or their IR over IP (IR Anywhere) boxes?

My IR distribution system is so plagued with IR noise, I was thinking of switching to something else...

thanks Kevin.

Thanks Kevin,

not used iViewer in a while - so that's prob not an issue.

Is iServer on the Joggler a completely separate app? (just thinking about what happens if the joggler flash app crashes...

Great work Brett - looking forward to the Joggler iServer version.

One question for you or Kevin - if I'm also running PC flash versions of xAPFlash, can that connect to the joggler too - or would...

Thanks Stuart :)

Looks good :)

what controller(s) do you use for your 1-wire? Oh, and what part is the sensor?

Paul.

I thought that might be the case - I'll have a look into text boxes although that's a bit fiddly during design - otherwise I'll have to rethink my design.

Cheers,

Paul.

Ah, I also noticed that the on state button (using my custome PNG button) overwrites the label (or the label disappears). The offset for the label was -40 so it'd appear over the button - is this a...

Is label offset only for vertical alignment?

I have some buttons I designed where i'd like the label to appear over the button but the button has an icon LHS - so I'd like to offset the label to...