I use Homewave on iPhone and iPads. you can create individual page layouts. You do have to purchase a license.
Type: Posts; User: jolly1
I use Homewave on iPhone and iPads. you can create individual page layouts. You do have to purchase a license.
Success
Here is how I got the fhz1300 working
Installed the supplied program in german
Went to device manager
Universal Serial Bus controlers
ELV FHZ 1300 PC
Fon,
Went thro your article, when I go to device manager there is no com port. Only shows in USB FHZ1300.
When I set fhem.cfg to
define FHZ FHZ /dev/USB0
Chnged to ActivePerl
I...
hi some further info
It would appear requires a virtual comport. In the properties for the eLV fhz1300 driver in device manager, in the advance properties set the check box load VCP. Which...
Hi Thanks for that allows FHEM to start up. But uncovers another problem. Do not get connection to FHZ1300
define initialUsbCheck notify global:INITIALIZED usb create
If I use the above get the...
Hi NickC
I have just ordered the FHZ1300 to ad to my system.
4 zones two rads per FHT8 thermostat.
Have installed FHEM and tried to start, jusst to see if I coud become familar with...
Kevin,
Here is the info for review in the New Year. Installed a serial port monitor 15 day trial. xAPTel see manually dialled number, but no traffic to serial port when using dial facility in...
Kevin,
Girder starts on pc booting up, so this would be the firt xap application running. disabled xap in girder. Re booted with xAP disabled in Girder
Started xfx hub This is...
Kevin,
Here are answers to the questions.
first message xAPTel broadcasts after start up
xap-header
{
v=12
hop=1
uid=FF233201
Kevin
thanks for that I take it the second set of commands couple of messages above are Ok.
I did manage to send commands from girder to xAPswitchboard as if xAPtel were sending them and...
Kevin,
Tried searching MI4.biz and cannot find the file. Tried http://patrick.lidstone.net/html/dev_tools.html when I click on xAP Active x, I get the following xapax_17.vwz ??
Kevin,
Carried out search of c:\ for xAPAX.ocx and it cannot be found is this the problem?
Hi Kevin,
Revisting the schema, final started to understand how the messages should be structured.
first message sent
xap-header
{
v=12
hop=1
uid=FF430000
Hi manage to get Girder 5 to send out CTI.cmd, but Girder insert a blamk line after the first closing curly bracket }
Does this corrupt the message ?
xap-header
{
v=12
hop=1
Hi Kevin
Both on Same PC running windows 7 64 bit. Hub is xFX
Thanks for taking a look
Hi,
Tried xAPautomation with the following query, no replies :) hopefully someone here can help.
Only just discovered xAP, I think xAPtel is broadcasting messages but not recieving them from...
No they were GU10, I am actually awaiting delivery of G9. My problem withe G9 is the diameter cannot be greater than 23 mm or the gass shade won't fit
12 volt systems did not cuase a problem with...
L = live
~ = switched wire with the switch on becomes live at mains volts
N = neutral if the second N is is connected to the first N ie test with a meter if ) ohms then is just a loop terminal....
When the complete circuit was changed to all leds. X10 dimmer modules would dim down the go back to full power. As Toscal metioned x10 I believe requires a minimum load of 40watt or so. I chaged the...
In the one circuit of 12 volts which was still flickering, changeed one lamp back to 35 watt halogen and Les are now stable. It is still the orginal transformer.
Hi tried both dimmable and non dimmable. You are correct regarding the minimum watts (high impedance) most of the circuits had 3 x 50 watt halogens replaced with 3 x 4 watt leds. The strange part as...
Hi
Decided to change thee house lighting from halogens to led lamps. Not so much save the planet as cut the Electricity bill.
Had a combination of 12 MR16 volt halogens, 240 volt GU10 and G9.
...
Hi
Have just installed a a thermostat and valve actuator from www.housetechsolutions.co.uk the non pro set. I have read thro the 22 pages of the thread, gave me me lots to think on. MY question...