I was about to suggest changing the 'stroke' parameter, but looks like you got there already :).
19.33 has the load scaling feature, but it isn't enabled by default, so I don't think that would be...
Type: Posts; User: ally153
I was about to suggest changing the 'stroke' parameter, but looks like you got there already :).
19.33 has the load scaling feature, but it isn't enabled by default, so I don't think that would be...
The feature is activated when the outside temperature gets close to or exceeds the room setpoint when the room temperature is already within 0.5C of setpoint. As you've noticed, the 'close to'...
I've got winter boost to bring my setpoint up to 19.5 during the day... ;)
If your setpoint is 20.5, the zone should come out of saver if the room temperature when the room drops below 20C. A...
Once Warm Weather Saver is active in a zone, it doesn't cancel until the room temperature drops 0.5C below the current setpoint, based on the values you've mentioned the inside temperature is still...
Thanks CT1, some users have reported in the past that they are seeing Evo's temperature lagging what other online sources are saying by several hours, this means you could be seeing a morning...
Both smart weather features use the outside temperature as a boundary condition, so in the case of winter boost, it will be more likely to activate if the outside reading is lower on the stat and...
I hear you - when I last looked into the Apple MFI program, you required a specific Apple authentication chip in order to obtain Homekit support (smaller non-commercial applications I think could...
Hi all, sorry I've been quiet on here - between holidays and project work, I've not had a chance to keep up-to-date with the community. There has been internal investigations on-going on the delayed...
Just catching up on posts! Like Andy has suggested, the HCE80 only sends the maximum demand to Evo, as opposed to the individual zone demands. This is usually the 1st Evo underfloor zone as it's...
Alex, can you confirm what version of the firmware you are running? This behaviour was corrected for the latest beta which is what will be the target of the next public release, so I suspect you have...
The forum chewed up my last post, so here we go again... :) Yes, you're right we changed the text of NORMAL to FULL. The advice the text gave should have been consistent between versions however. The...
The top option, which is marked NORMAL in the UI is load scaling with outside temperature compensation. We expect that most Evo sites will benefit from this to accommodate for the heat loss of...
If you send me a private message with your MAC address I can push the latest firmware to your device. The changes in the latest software can be found here:...
Looks like Mandrake beat me to the punch with this! It's always hard to tell exactly what went wrong, but I'd agree that the issue sounds most likely like a missed message. Toggling the demand or...
I've been trying to refrain responding too deeply into the outside temperature issues until I got a more complete picture from the connected team, but don't want you all to think I'm ignoring this...
I think, as with all the new features, they are all foundations to build on. Take the load scaling for example, we tried to build upon the feature we released to testers and improve it for the second...
Sorry EVOHOME Shop, not meaning to keep you away from the party!
How are the new features treating you now the weather is turning??
Frustrating! I've forwarded a few MACs to the...
I completely understand how annoying the override issue could get!
Perfect, this is exactly what we were aiming for and what we had seen in our test lab and homes – great to see feedback from...
Currently Evo uses internet weather data and therefore the smart weather features are reliant on them. I don't disagree on your desire to de-couple our solution from the internet, but the feature had...
jhjgjHi all, I've had a long weekend, so just catching up in posts! Great feedback everone – keep it coming! 😊
The from speaking to a team member in the Wi-Fi team, the weather API should be getting...
I apologise for the confusion. I was supplied a list of field trial MAC addresses, which must have contained additional MAC addresses from the previous trial. The firmware deployed is what we intend...
Due to resource and time constraints, all changes to the firmware are local changes only. To bring further integration to the cloud would have required resource and engagement in Wi-Fi, Cloud API and...
Currently we're using Accuweather as our weather source.
Good to hear the update has got to the group. Let us know of any feedback you all have!
I can see and understand the difficulty many have had finding the cold winter boost threshold setting. This...
The release notes are embedded in the 2.0.19.31 thread here:...