Search:

Type: Posts; User: ecoheated

Search: Search took 0.00 seconds.

  1. i did ! Luckly from my desk. I can see the...

    i did !

    Luckly from my desk.

    I can see the heat pump status live.
    I can see the pump on the UFH from my desk with the cupboard door open!
    And i have my Evohome next to me. With a stop watch...
  2. Well, bad news, i did it all manually. :rolleyes:

    Well, bad news, i did it all manually. :rolleyes:
  3. Quick update. Settings: Maximum cycles per...

    Quick update.

    Settings:
    Maximum cycles per hour: 3
    Minimum run time: 5 mins

    All zones off.
    Then, turn on one zone at just 0.5 degC above current temperature of room.

    Interesting results...
  4. Opentherm looks like it does solve this issue! ...

    Opentherm looks like it does solve this issue!

    I will report back later on some testing i will do this evening to see how the underfloor demand is handled.
  5. Thank you for the detailed reply! I found your...

    Thank you for the detailed reply! I found your suggestion of a single shot timer interesting as it was the only solution i had in mind if i cant fix the Evohome setup (which seemed unlikely).

    I...
  6. Evohome with Heatpump - Shortcycling Inefficiency due to limited boiler settings.

    Running a fixed speed heat pump from Kensa. They have high starting currents and poor efficiency below 6 minutes.

    There is a very good report here on how inefficient it is to run the heat pump...
Results 1 to 6 of 6