Search:

It’s on Eco. Always.

Talking of DHW my supply leaves a lot to be desired. We are told that a combi gives hot water at mains pressure. It might but I have had to back off showers and taps...

I am only 3 weeks in with my new boiler - an Intergas Xclusive 36 combi - so still getting used to it. I have connected the OT Bridge with no external temperature sensor. So far all seems to be fine....

Thanks. From what you say whilst 6 litre may not be enough it is in my current set up. I don’t achieve 2.6 bar.

I seek the advice and opinions of the experts in the forum!

Three weeks ago I had my boiler replaced with an Intergas Xclusive 36. I use the Evohome control system and OpenTherm using the...

To me that seems odd. The fan is doing a different job and is not needed when the pump alone is on. Mine certainly isn’t. The fan is needed to extract fumes from a firing boiler.

Mine does not fire up during an overrun, but that would defeat the object of the overrun, as you say, it should be off. My pump though is frequently starting up of its own volition, often every few...

Took my Panel off it’s stand this morning to adjust a room. In less than 5 minutes, nearer 3 it started to bleep and then immediately the message on the screen making it unusable unless I put it back...

Thanks for this. The manual says:

“The boiler has a connection for an Intergas outdoor sensor. The outdoor sensor must be used in combination with an on/off or OpenTherm room thermostat.

In...

Well that saves me drilling a hole through my outside wall, getting the ladders out and screwing the sensor to the outside wall! Indeed also it removes the hassle of getting the front of the boiler...

I have my Honeywell outside sensor to install, the boiler having designated connection points for it, are you saying that if I install it OT will ignore it and rely on what the internet tells it?

In the early days I tried optimisation but gave up on it. Then one was able to set it individually for each room or zone. It never seemed to learn. I had it set to 1 hour. Rooms were up to...

Thanks. According to the manual I can adjust this between 0 to 15 minutes. I will go into action. I have no idea what it is set at at present, presumably a default setting .

I don’t have a Twitter account but the system is not working this morning either. Has not been since 05:45 when I first checked. If it is planned maintenance we should be told in advance. If it is a...

I also now get “Why is boiler always starting? I keep hearing a whoosh sound every few minutes. I thought these boilers were meant to be quiet?” To explain that the boiler was not firing up but she...

Indeed. There is no reason for Evohome not to evolve as different systems are brought in. It has done to an extent - OpenTherm, heat pump support etc.

Two comments from good friends of mine. Both...

Honeywell have been behind electric control systems for decades and well respected for that. I can’t see converting Evohome to work on an all electric system would be a big issue for them....

Do you expect a reply

I look on the system information as user information. Useful information to have if something seems wrong.

As for your other I agree. Sentiments I have expressed for a long time. I am sure we were...

Having recently replaced my boiler and installed OpenTherm in my case the one bit of additional informative I would like to see in the app is the system data that tells me what room, including the OT...

Now a few days in with OT, yes I see this is what is happening. I am finding with OT that rooms get to their designated temperature a little slower than they used to but not such as to be an issue....

Stranger What you report is what one would expect but we don’t get. I wonder whether there has been a quiet update! Or whether it is type of battery dependent. Although had the issue with the...

It certainly does something strange. A week ago as off the mount the batteries lasted only a short time and I needed to re-pair a BDR91 and ensure I had deleted an HR92 and a zone, I ended up having...

I connected the OpenTherm Bridge this afternoon in place of the BDR91. I suppose the system goes into learning mode over the next few days or weeks. However, the boiler, an Intergas Xclusive 36kW,...

My ghost room is no more. Having taken it up with Honeywell/Resideo they have removed it at their end.

I concur. It is an odd decision for the the app not have the info. There is no reason for the app not to have what is fairly basic information about the system and I am not convinced the cost for it...