Search:

Type: Posts; User: Jack007

Search: Search took 0.00 seconds.

  1. Two thoughts: 1. Maybe the RPi got another ip...

    Two thoughts:
    1. Maybe the RPi got another ip address from the dhcp
    2. It helps to use the correct port like http://192.168.1.227:8080/

    Also install VNC viewer (or something alike) to get easy...
  2. I forgot to ask; What kind of RPi did you get?

    I forgot to ask; What kind of RPi did you get?
  3. This how it looks like. Remember you have to...

    This how it looks like.
    Remember you have to get an (free) API key for this to work (https://openweathermap.org/price).
    Also, you can't select any city, try a mayor one in your vicinity first and...
  4. As far as I know it can only display information...

    As far as I know it can only display information that is available in HHTC (see also Honeywell Home app) like schedules, current temperatures, setpoints, overrides, etc.
    Heat demand is not one of...
  5. Well, that the beauty, you don't have to build or...

    Well, that the beauty, you don't have to build or code anything. Domoticz is free/open source and runs on ARM, Windows and Linux (https://www.domoticz.com/downloads/). Also most NAS providers...
  6. For this I use Domoticz. It's running on a...

    For this I use Domoticz. It's running on a Raspberry Pi 3B+. It can register and control almost everything from Evohome.
    Logging room temps and setpoint is standard. Running for over 2 years without...
  7. Replies
    11
    Views
    1,449

    Hi, In my setup i use a R8810 to operate a...

    Hi,

    In my setup i use a R8810 to operate a Nefit heater (EcomLine exc.).
    As the heater doesn't understand OT i have to convert OT to EMS to iRT. This is done by the two modules on the right...
  8. Wasn't there also an issue with the heat produced...

    Wasn't there also an issue with the heat produced by charging the internal batteries of the EVO or is this what you mean?
  9. Replies
    3
    Views
    2,020

    Hi, I agree with your analysis. Mine ATF600...

    Hi,

    I agree with your analysis. Mine ATF600 outputs about 4.2 V with the Evotouch connected.
    I suspect that when the recharge cycle of the internal rechargeable batteries kicks in the voltage...
  10. Replies
    3
    Views
    2,020

    EvoHome ATF600 power supply issue

    Hi,

    I recently installed a EvoHome system. The EvoTouch panel is installed on an ATF600 wall mount. As there was no room behind the wall mount, the existing thermostat wire was reused. Because of...
Results 1 to 10 of 10