Search:

Thanks Kevin, I had forgotten about that. I'll see how it goes over the next couple of days and adjust that if required.

I'm assuming even when you add a new zone, the learning still takes place,...

Hope you don’t mind me piggy backing on this, but I have wet UFH as a single zone, two loops controlled using a zone valve set up. It’s in conjunction with the rest of the house on radiators. The...

So I finally got round to turning on my UFH a few weeks ago, and it seems like the optimised start isn’t working. I’ve had to adjust the on time manually.

I’ve got one large room, with two loops,...

Cheers for the heads up. waking up to a cold room I can deal with, but getting into a cold shower would not be on! I'll keep an eye, but on the basis that they are getting on for 2 years old, it's...

Cheers for this. Would they not flag on the base station like the HR92's?

Interesting. Might be the travel cot which has gone back into the airing cupboard. Funny how it’s only affected the HW and not the open therm, but sounds like a similar situation to yours. I removed...

Balls, maybe I’ll have to rethink! I just found them to have a much more satisfying click when the angle is fitted.

Know what you mean about knocking them though.

Luckily we’ve just lost two...

Odd, as nothing has changed. Installation has been in for 2 years, but I have had a similar thing happen once before.

Any ideas why it would suddenly lose comms?

So tonight, just before I went to give the lad a bath, I noticed the hot water said 24 degrees. Queue the looking at the app, controller, valves etc. I manually opened valves to get enough for bath...

I’ve found they are more robust when fitted with the little angle plate. Our 20 month old, hasn’t managed to knacker one yet...

...although going by my wife’s logic, I’ve probably just jinxed...

No email here...

I’ve notice this problem tonight. App and controller not registering the same thing. Frustrating as I’ve been trying to monitor my heating today, as it lost pressure last night!!! Don’t think I can...

Oh ok, so the actuators can be wired straight to the BDR91, and leave out the zone valve. TBH, I didn’t know this was an option! I thought the BDR was just on/off though, so won’t actually modulate...

Thanks for the reply. I should have said, I do have a room stat, from when we were originally using the room with a rad, hence the left over BDR91... think I actually have 3 spare!

So basically...

Hi all,

We’re in the process of knocking two rooms together, and whilst we dig out the floor to sort out some damp issues, we’re going to take the plunge and add some UFH, to our evohome system.
...

Thanks for this. I had seen those, but TBH I hadn’t heard of the make, so wasn’t sure how the durability would be.

When I move one of the rads, I might give it a go.

You absolutely right on the corner TRV. Would have been much better. However when I was doing the installation I couldn’t find corner valves, in chrome, at the right price, from a good manufacturer...

TBH they are a bit of a barnacle outcrop! but no more than a normal TRV. This was a major concern for me originally (I like things looking good), but honestly a year after the install, we are used...

Quick question, how can I tell if the batteries are out in the hot water temperature module?

Odd thing happened yesterday, where I had no hot water. Manually opened the valves and all OK, so set...

So my current schedule turns the heating down to 5degs when we don’t need the heating system on. As the house is old, uninsulated (to the most part) and with lots of single glazing, the heat...

Frustrating as you buy something based on all the spec saying it’s better and more efficient, and turns out it’s not that brilliant!

Makes me wonder if I’d be better off ditching the OT all...

So home tonight, and the wife is out, so I’ve tucked myself in the airing cupboard for a bit of a play!

It would seem on the ideal, all the set temp does in the menu is to control the maximum that...

This is what I don't get with the Ideal. I literally get the dial on the front, and then the installer set temp on the electronic menu. No option to change or even any mention of gradients etc.
...

I know what you mean about being none the wiser. I guess, yes the logic systems should sort it all out for you.

The one thing with the Ideal is the TSet and TSet Max temps you talk about I can't...

When I initially contacted Ideal, they said "The set temperature for the flow on the front of the boiler is over ridden by the open-therm controls which will increase or decrease the flow temp due to...