Same for me.
You can wire a thermocouple either way round, so easily extended.
Type: Posts; User: g6ejd
Same for me.
You can wire a thermocouple either way round, so easily extended.
With the Glenhill tank I have, the thermostat tube is right next door to the immersion, which is a bit of a design fault really, anyway, I get a similar effect, the immersion comes on, heats the...
Like you, I never found the noise intrusive, now I have the irony of my wife saying everyday ‘have you noticed how quiet the radiators are now’ when everyday it was ‘do they have to be that loud’😀
We have 16 HR92's, (12 + 2) are fitted to fairly modern double panel radiators and 2 to stainless steel towel radiators.
HR92 actuation noise was considered in this household (by XYL) to be a...
You need the Hub, that calls for heat. In its simplest form the Nest has two no volt contacts that open/close to demand heat and the Evohome can do that easily via a BDR91, you’d have no control over...
You need to determine which is the closest format of your heating, for example mine is a Y-Plan (so has a 3-port valve) and I use a BDR91 for the heating demand and a BDR91 for the HW demand, with...
Its the laws of physics:
‘the specific heat capacity of humid air is greater than dry air and humid air will take more energy to heat by a given amount.’
For example one of the advantages of...
You could just install another Controller and use one for upstairs and one for downstairs giving 24-zones maximum and the two controllers can run independent schedules. With more zones upstairs, then...
That’s why I mentioned the time it’s been installed the temperature is set to 21° and it maintains that temperature perfectly never too cold in the bathroom, so I conclude it is measuring the...
Worked perfectly now for 22-months. Mounted to Honeywell right-angle adapters.
1321
Thanks, I missed that. It confirms what I now know that although Hive, Nest, Drayton and just about all other suppliers of energy management equipment have registered their products Honeywell have...
I recently had my home assessed for energy usage and to gain an EPC required for solar panel installations if you want to claim and receive the feed in tariff. When the assessor arrived and came to...
How old are the batteries and don't take any notice of the battery indicator, it tends to be over-optimistic. Does the problem follow an HR92 if you swap a errant one with a known good working one?
Thank you for the insight to the system operation. We have 4 dual HR92 zones the bedroom where the problem was being the 4th. What I observe is all the multi zone radiators act independently, yes one...
I’velearnt something about multiple HR92’s in one zone, previously we had one HR92 and one uncontrolled radiator in our bedroom and following a bathroom refitting moved a now redundant HR92 to our...
Same too, it might take a while to propagate to all controllers.
Legionella in the home setting usually manifests itself in the form of mild cold or flu symptoms. Of the 15 or so serogroups 1 is the worst, most people contract sero group 5-10. In the household...
I'm indebted to this forum as it answered my query quickly and with clarity. Probably for those who don't use this place the installer explained it all to them. Thanks chaps.
Ah yes but to me Heating off is not the same as DHW off as nearly every system has separate controls for HTG and DHW. I'll try 'away' ironically the only one I have not tried as it says temperatures...
Yes a good idea and reflects what a modern /inform user wants to do.
I'm in my 8-month of Evohome installation and usage and with the holiday season coming I've been trying to turn off the...
I can't find the link to the setup instructions, but for your setup, don't go through the Evohome setup on the basis of using separate boiler and heating controls (BDR91's) reset and then add DHW and...
I've made the link to an Economy mode issue because if I switch it off there are no problems. I agree with your analysis. I have narrowered it down to sometime between 2100 and 2300 the former is...
I've just started to use Economy mode to stop rooms being heated (correctly) when it's relatively warm outside and I notice the CS92 link keeps failing to report water temperature (--) on the...
IN the last few days my controller has been updated, now at:
App 01.00.07.01
WiFi 01.00.06.10
No loss of configuration or operating perturbations obvious - I wonder what changed and why? May...
Those would do for me and surely they must be really easy to implement especially which zone is calling for heat - and that's where I get confused because why not implement the quick easy wins and...