Search:

Type: Posts; User: victorp1612

Search: Search took 0.00 seconds.

  1. To echo a request a few pages back : I would like...

    To echo a request a few pages back : I would like my OpenTherm bridge to allow me to set a max flow temperature on my boiler (a Viessmann) effectively
    I eventually gave up on this request after...
  2. As Viessmann told me ' not our problem', I've...

    As Viessmann told me ' not our problem', I've also got a case open with Honeywell (14568935 ) for the same issue . @Rameses , happy for you and support to check what opentherm is doing and what...
  3. Can confirm that ... here's the answer I got on...

    Can confirm that ... here's the answer I got on twitter : The open therm controls are a learning controller so it will adapt once it understands the boiler it’s connected to (1/2) / beyond that you...
  4. Hey Stephen, I've got a 100W installed ( 19kw...

    Hey Stephen,

    I've got a 100W installed ( 19kw ) with Opentherm module , 9 Rads and stored HW.
    System was installed in june 2016 , so the learning process is over .
    Same behaviour here : the...
  5. Skill drop happened again this morning ... any...

    Skill drop happened again this morning ... any progress on a permanent fix ?
  6. I lost control of my evohome through Alexa and...

    I lost control of my evohome through Alexa and was getting the ' Device x is not responding ' . I disabled and re-enabled the skill, ran a discovery and it's back working.
    Is this the expected...
  7. Are you looking at running it on Windows or...

    Are you looking at running it on Windows or Raspberry Pi ? ( Running it on Pi , without a HGI80 for now )
    For Pi , I followed the instructions on https://www.domoticz.com/wiki/Evohome and didn't...
  8. Replies
    21
    Views
    6,518

    I have a 14yr old house , 3 bed + converted attic...

    I have a 14yr old house , 3 bed + converted attic - I've checked the label on the boiler and it's a 19kW.
    For HW, I didn't do any special config. The sensor attached to the cylinder is connected to...
  9. Replies
    21
    Views
    6,518

    No additional Viessman boxes , just the plain...

    No additional Viessman boxes , just the plain boiler and the evohome.
    Opentherm module attached to boiler and a BDR controlling the HW.
    As a matter of interest, do you have dials ( knobs ) on your...
  10. Replies
    21
    Views
    6,518

    I've been reading your other posts , looks like...

    I've been reading your other posts , looks like you're having a hard time with your set up ...
    Just checked my boiler behavior : here's what I noticed.
    Current heat demand is minimal - the system...
  11. Replies
    21
    Views
    6,518

    Yep , sorry I should have added that I'm using...

    Yep , sorry I should have added that I'm using Opentherm with a Vitodens 100W. I have 9 Rads and the DHW kit on a S plan config - with a ABV installed.
    I definitely see Opentherm modulating as when...
  12. Replies
    21
    Views
    6,518

    Interested to hear their feedback as I have the...

    Interested to hear their feedback as I have the same setup as you
  13. Black Friday deal on Echo and Dot today ... just...

    Black Friday deal on Echo and Dot today ... just saying :-p
  14. Had the same issue. To resolve , had to disable...

    Had the same issue.
    To resolve , had to disable and re-enable the skill.
    After a discovery, I've noticed that HotWater and Eco / Away / Custom modes are available.

    'Alexa , turn on the hot...
  15. Do you mind me asking where you got it from ? I'm...

    Do you mind me asking where you got it from ? I'm looking at getting one soon and the only units I've found are on EBay ( and I no longer have an account ) Thanks !
  16. Replies
    33
    Views
    15,080

    I was able to link my TCC account with my Alexa...

    I was able to link my TCC account with my Alexa account this morning ( I'm in Ireland ) : I got the following message ' Alexa has been successfully linked with Honeywell Total Connect Comfort...
  17. Replies
    33
    Views
    15,080

    Yep pre-ordered one and looking forward to...

    Yep pre-ordered one and looking forward to playing around with it.
    How does it integrate with EvoHome ?
  18. Thanks , works like a charm :-)

    Thanks , works like a charm :-)
  19. Could you reshare your updated script please as...

    Could you reshare your updated script please as the links above are dead ?
    Thanks
  20. Replies
    27
    Views
    22,706

    I got a Viessmann Vitodens 100-W installed last...

    I got a Viessmann Vitodens 100-W installed last month. It's coupled with the EvoHome Opentherm module and controls 9 radiators and 1 DHW cyclinder.
    Hope this helps.
  21. My mistake ... I was checking the Domoticz mobile...

    My mistake ... I was checking the Domoticz mobile app and the temperature had fluctuated over time in that room - it was showing 0.5 resolution.
  22. Yep, I Do. I did a quick check this morning and...

    Yep, I Do.
    I did a quick check this morning and noticed a strange one : only 1 out of my 9 rooms is now showing more granular info.
    I'll check again when i get home tonight and report back.
  23. All sorted now Freeranger , thanks for the tip :...

    All sorted now Freeranger , thanks for the tip : I was indeed running the script from the plotly plugin folder. Running it from the evologger folder resolved the issue and I now see data flowing in...
  24. Hi Freeranger, Thanks for your evologger tool ,...

    Hi Freeranger,
    Thanks for your evologger tool , working fine but I'm having an issue with uploading to Plotly and was hoping you can help .
    Evologger is picking up data no problem but I then get...
Results 1 to 24 of 24