Search:

Type: Posts; User: anniesboy

Search: Search took 0.00 seconds.

  1. Replies
    6
    Views
    124

    Thank for that information,I did notice that...

    Thank for that information,I did notice that attempting to reset time had no effect. After ensuring the power jack was firmly inserted I ruled that out.
    I then separated the batteries in the...
  2. Replies
    6
    Views
    124

    Thank you,I will do just that if needed.

    Thank you,I will do just that if needed.
  3. Replies
    6
    Views
    124

    Thanks for that thought, I did not notice if wifi...

    Thanks for that thought, I did not notice if wifi was connected.
    As it is working OK at the moment I will leave alone but will check connectivity should it happen again.
  4. Replies
    6
    Views
    124

    Evohome controller clock stopped

    I woke this morning to find only three radiators on,on looking at my controller clock it had stopped at 7.15am.

    I checked that jack plug was firmly in place before resetting the time but it did...
  5. This may help ...

    This may help https://www.youtube.com/watch?v=mHFeib8ydWU&t=165s
  6. Replies
    9
    Views
    327

    My recent and only contact with Resido was...

    My recent and only contact with Resido was positive my call was answered quickly, I was sent an email with helpful suggestions and given a case number for follow-up if needed.
    It wasn't.
  7. Replies
    2
    Views
    210

    On the controller,press and hold "settings",press...

    On the controller,press and hold "settings",press green tick,then press "system summary.
  8. Replies
    356
    Views
    33,901

    Make sure the power jack is pushed fully home,I...

    Make sure the power jack is pushed fully home,I had two lost/restored notices. It turned out to be jack not fully pushed in.
  9. Replies
    3
    Views
    362

    I think I have resolved the problem,it was caused...

    I think I have resolved the problem,it was caused by a poor connection to the base station.
    Most likely because the engineer who installed the smart meters moved the controller in order to site the...
  10. Replies
    3
    Views
    362

    The thing was after power was restored every...

    The thing was after power was restored every thing worked as normal.

    However this morning heating failed to come on.
    I discovered the time to base station clock had stopped,tried to reset but it...
  11. Replies
    3
    Views
    362

    Evohome faults

    I had smart meters for gas and electricity installed yesterday.

    I noticed shortly after the installation a fault showed (mains low) followed two minutes later by (restore).

    What does this...
  12. Replies
    356
    Views
    33,901

    It is now up and running ,for now

    It is now up and running ,for now
  13. Replies
    356
    Views
    33,901

    My app is also saying planed maintenance try later

    My app is also saying planed maintenance try later
  14. Replies
    4
    Views
    435

    This is a completely new installation,the boiler...

    This is a completely new installation,the boiler was put in the loft in order minimize lifting of flooring etc.
    I have a decided to get a loft ladder installed,I am glad to hear the relay can be...
  15. Replies
    4
    Views
    435

    Not S or Y plan, it is system boiler with no hot...

    Not S or Y plan, it is system boiler with no hot water provision, that is provided by an immersion heater.(thats another story)

    I have ten rads with eight zones, ( 9 hr92s ) and one with standard...
  16. Replies
    4
    Views
    435

    Evohome wireless relay

    I have a newly installed system
    It was only used initially to enable plumbers to test everything was OK.
    Yesterday I decided to turn it on only to find I was getting no heat at all ,I realised it...
Results 1 to 16 of 16