Search:

Type: Posts; User: Billywizzo

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    12
    Views
    1,008

    As you are not controlling the boiler via...

    As you are not controlling the boiler via evohome, I would make sure that there is a bypass in your heating system so if the room stat fires up the boiler but none of the valves are open, the Central...
  2. Replies
    12
    Views
    1,008

    Just asking what you mean by boiler is controlled...

    Just asking what you mean by boiler is controlled by the old controller.
    Have you removed the HR92 valve body off the rad and made sure the black part is moving freely and the pin on the rad valve...
  3. Replies
    12
    Views
    1,008

    When you refit the HR92, you do make sure you...

    When you refit the HR92, you do make sure you turn the black part of the body fully open for the HR92 to recalibrate.
    Have you tried swapping the HR92 with another one to see if the problem moves to...
  4. The pin in the adapter can be pushed back and...

    The pin in the adapter can be pushed back and fourth, I just wondered if it is meant to be able to move. It moves out when you turn the black dial but then you can just push it flush and wondered if...
  5. Wondered if anyone knows if the pin in the...

    Wondered if anyone knows if the pin in the adapter should be able to move.
    Had another radiator warming up when the heating was on for another room and this radiator was set to a colder temp so...
  6. Replies
    14
    Views
    1,551

    Glad you managed to sort it out

    Glad you managed to sort it out
  7. Replies
    14
    Views
    1,551

    No idea then sorry. I just connected my bridge to...

    No idea then sorry. I just connected my bridge to the boiler and set the evohome to opentherm and then did the binding.
    Might be worth emailing Honeywell about it, they were good when I emailed...
  8. Replies
    14
    Views
    1,551

    Just looking at the manual for your boiler, you...

    Just looking at the manual for your boiler, you have removed the connector between terminals 6-7 as well as connecting the opentherm to terminals 11 and 12.
    And like G4RHL says, once connected a...
  9. Replies
    14
    Views
    1,551

    If it does connect, it will still say opentherm...

    If it does connect, it will still say opentherm in the options until you change it. When I setup mine I connected the opentherm bridge to the boiler and when I setup the evohome controller it was...
  10. Replies
    14
    Views
    1,551

    I am not sure my evohome tells me it is receiving...

    I am not sure my evohome tells me it is receiving a signal from it. I am sure it just said it had binded to the R8810 receiver and the receiver just started to flash green slowly.
    It could be a...
  11. Replies
    14
    Views
    1,551

    Just checking you have set the evohome system...

    Just checking you have set the evohome system devices option to appliance control opentherm bridge option.
  12. Did you ever sort this out. I have had the exact...

    Did you ever sort this out.
    I have had the exact same problem with one of our radiators and valves.
    The radiator was getting warm all the time even when turned to off.
    I found it hard to manually...
  13. Replies
    20
    Views
    3,089

    When we had the room temp set before smart...

    When we had the room temp set before smart weather, the room would feel cold on cold days even though it said it was at the correct temp.
    Now on cold days the room goes to a slightly higher temp and...
  14. Replies
    20
    Views
    3,089

    The smart weather seems to work fine for me. If...

    The smart weather seems to work fine for me.
    If it is colder outside, the rooms I have it set up on will got to a higher temp to help compensate for the temp outside.
    When we had the warm spell,...
  15. Mine has done similar. Last night it set the...

    Mine has done similar. Last night it set the livingroom to 5 degrees but later it turned it back on. Today it has set a few to 5 degrees but not all.
    I am sure this is all part of the smart weather...
  16. Replies
    6
    Views
    1,349

    So did mine, it just appeared. A quick email with...

    So did mine, it just appeared. A quick email with a picture of your controller MAC ID and CRC code will sort it out
  17. Replies
    6
    Views
    1,349

    There are other posts about phantom zones if you...

    There are other posts about phantom zones if you search.
    Contact evohome support and they will remove it for you
  18. Are you checking to ensure the HR92 is properly...

    Are you checking to ensure the HR92 is properly locked into place on the radiator.
    I didnít fully lock the one in my kids room in place and it did not shut off the radiator, so the radiator was...
  19. I have an Ideal combi boiler with evohome...

    I have an Ideal combi boiler with evohome opentherm setup and don’t seem to have any problems.
    I just connected the opentherm bridge, set up the controller to opentherm and let it do what it wanted,...
  20. We have an opentherm controlled boiler and the...

    We have an opentherm controlled boiler and the optimisation works quite well.
    The boiler output seems to be dependent on what the room temp is and I assume how long the system thinks it will take to...
  21. Replies
    11
    Views
    1,566

    The ghost room does not control anything, that is...

    The ghost room does not control anything, that is what I was told. So if you have it, it is not going to do anything but just annoy you.
  22. Replies
    11
    Views
    1,566

    Just info for the op so they know to email and...

    Just info for the op so they know to email and support will remove it without you having to delete anything.
    I had it twice and both times it was removed within a day of me emailing them my...
  23. Replies
    11
    Views
    1,566

    You need to email to the support department about...

    You need to email to the support department about the ghost zone. They will ask for info from your controller and remove it
  24. Replies
    20
    Views
    2,790

    Are you sure it is not the frost protection...

    Are you sure it is not the frost protection working. I know someone has said that if you turn it to off, frost protection is disabled but the instructions state that it will still work if the heating...
  25. Replies
    20
    Views
    2,790

    It works on mine, I turned it off and it always...

    It works on mine, I turned it off and it always is off.
Results 1 to 25 of 41
Page 1 of 2 1 2