Search:

Type: Posts; User: Andy the Minion

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Fmb, I was suggesting contacting the Resideo tech...

    Fmb, I was suggesting contacting the Resideo tech support rather than Remeha (no harm in that of course) but Remeha probably won't have much idea what the new Evo features are :)
    Regards AtM
  2. The BDR91T is available in the Netherlands but...

    The BDR91T is available in the Netherlands but only since the new heatpump firmware was released. I would recommend having a conversation with NL tech support as I can't predict how a hybrid heatpump...
  3. Mazzy, Do you have an outside temp in the top...

    Mazzy, Do you have an outside temp in the top left next to the connected icon? AtM
  4. If you are fully zoned on all rads you could...

    If you are fully zoned on all rads you could choose to leave the CH valve open manually then clear and rebind its BDR91 as a boiler relay. You would not be able to prioritize DHW if you do this (and...
  5. There is a fuzzy logic control in the device so...

    There is a fuzzy logic control in the device so it is not a flat delta T away from setpoint. At 17.3C RT and 17.5 SP at perhaps 10-15C outside temp the demand % will likely be very very low, maybe...
  6. DB, I don't think anything has changed in low...

    DB,
    I don't think anything has changed in low load operation sub 10% (1 min in 10min, 6 cph) the cycle rate is sacraficed to maintain a min on time
    AtM
  7. ssb_tv The HCE80 only reports the almagamated...

    ssb_tv
    The HCE80 only reports the almagamated heat demand on its first zone so the Evo system overview has to show it there but it will be responding correctly Evo gives the heat the HCE asks for...
  8. DB The system does operate below 10% but not as...

    DB The system does operate below 10% but not as you describe. A sub 1min firing cycle is generally very inefficient so the cycle rate is altered instead
    AtM
  9. Clive, I see you suspect the BDR91 response but...

    Clive, I see you suspect the BDR91 response but can I also check the basics as well please? Where is your sensor on the tank, is it the surface mounted version and how high on the tank is it? If not...
  10. Hey! Not for me it isnt! :(

    Hey! Not for me it isnt! :(
  11. Sorry guys, I'm still here but the project...

    Sorry guys, I'm still here but the project development is taking a lot of my time. Everything is either off site or scattered and taking more time and effort than it should and I am running 12+ hour...
  12. @G4RHL This ‘error’ is intentional and was a TCC...

    @G4RHL This ‘error’ is intentional and was a TCC thing. There are a lot of devices connected to TCC around the world and schedules tend to be based on the hour and half hour intervals The cloud team...
  13. Hey, what goes on here, I spent 20 minutes...

    Hey, what goes on here, I spent 20 minutes yesterday replying to this and explaining the operation.
    But it's late and it's been a very long day, so for now... no we dont base temperature control on...
  14. Replies
    2
    Views
    552

    @Meh Looks like a ghost zone, they used to happen...

    @Meh Looks like a ghost zone, they used to happen when partial zone data was sent to the cloud as the Wifi processor woke up. We think the issue is solved now but some can persist. There are two ways...
  15. @DBMandrake, I have purged a good pile, can you...

    @DBMandrake, I have purged a good pile, can you try again please
    Regards
    AtM
  16. @mikey I'm interested to know what makes...

    @mikey I'm interested to know what makes optimisation something you would want in one room but not in another, I have heard the request before but i dont think ever the use reasons?

    It was taken...
  17. I do hope that isn’t a reference to biting the...

    I do hope that isn’t a reference to biting the heads off avian mammals and catching something nasty in the process?
  18. @DBMandrake The answer to 1 is Yes and yes. We...

    @DBMandrake The answer to 1 is Yes and yes. We were aware of some bugs and had already fixed some at time of release, these missed the cut for internal testing so could not be included in your...
  19. @guyank Thanks for the MAC id. We had a look at...

    @guyank Thanks for the MAC id. We had a look at the system and as best we can tell the 5°C are all being caused by system off quick actions with reversions to Eco or Day off a few minutes later. The...
  20. @wilfman We generally don’t like rolling firmware...

    @wilfman We generally don’t like rolling firmware back. Any new configs tend not to play nicely when they get pushed backwards to a firmware that doesn’t support them, but it is always tested and we...
  21. @CTI I would still be interested to see a poor...

    @CTI I would still be interested to see a poor DHW recovery in action. Can you still PM me your MAC please
    AtM
  22. Happy to :) PM me your address please. AtM

    Happy to :) PM me your address please.
    AtM
  23. @guyank Yep the 35C wont be fixed until the next...

    @guyank Yep the 35C wont be fixed until the next release but I see its not actually overheating the room Can you PM me your MAC and I will have a look at the 5C events. Which compass direction is the...
  24. @guyank, Im not sure about that, I will check....

    @guyank, Im not sure about that, I will check. There have been times with previous versions where a recalculation is missed when coming out of manual modes
  25. I have some, quite a few.... AtM

    I have some, quite a few....
    AtM
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4