Search:

The egg timer just means it hasn't received any transmissions from the temperature sensor in the zone since the controller was rebooted, as they are only sent periodically and not very often if the...

Lots of threads have covered this problem before - a search for clock stoppped should turn them up. ;)

It's not loss of Wifi that causes it, it's probably a firmware bug. Unfortunately it has been...

Yes it's a bit naughty.... however lighting circuits aren't typically RCD protected and if its just a few milliamps it's probably not an issue in practice. And what's the alternative in a light...

So the alternatives now for UK wiring compatible smart light switches are......Lightwave ? and....... ??

Never heard of them before! That's a shame.

I'm looking to replace a couple of outdoor light switches (which are inside the back porch) with smart switches that I can control with IFTTT but still...

Plenty of wireless doorbells available from places like B&Q.

I bought two of these packs:

https://www.diy.com/departments/blyss-white-wireless-plug-in-door-chime-dc5-uk-wh/287772_BQ.prd

They...

A modern touch UI is what I would like, yes.

Not the creaky old 2000's era Windows CE interface that we have now with an insensitive resistive touch screen.

Most other smart heating systems...

Pretty sure we've already established that it communicates over a TLS tunnel to Honeywell.

So unless (a) you hack the firmware to make it not care about the certificate, (b) there is a security...

Now that I have the conditions I need I can create an arriving_home logic block:

https://drive.google.com/uc?export=download&id=1J7oVqQ8LPiWA0-WBUGKAwSkCWhUj3G0T

The block will perform an...

This started out as a query in another thread however after finding a solution that I like I thought the solution itself was worthy of its own thread as it has much broader home automation...

Thought I would post for those that may be interested that I think I have found a solution: https://apilio.com/

This is a free service that can be linked to IFTTT as a service, (previously it...

Not quite what you're looking for, but you might be interested to know that the Kasa controlled TP-Link devices like the Smart bulbs and smart plugs (I have both) are controllable both via their...

Ah of course.

But how much longer will the RFG100 be available, and does it have any functionality limitations (now or potential ones in the future) vs the WiFi controller connecting directly to...

Maybe it's time for a few of us to band together and come up with our own controller based on a Raspberry Pi with touch panel and CC101 wireless module ? :)

We have almost enough information on...

In our back porch we have a TP-Link smart bulb which is Wifi connected and has both a schedule and is linked to Alexa...

As the location of the switch for the porch light is very inconvienient...

I got the email announcing 4.8 too, got all excited that we might finally have got an overhaul to the app - which is pretty cumbersome and clunky to use and missing basic features like being able to...

Just fit it in another zone that doesn't currently have a remote sensor ? :)

My living room DTS92 has started rebooting when "bumped" by my 3 year old so I think I'll have to do the same thing to...

Sounds like an incompatibility or problem with the valve bodies on that top floor.

Forget about wireless comms for the moment - try turning the temperature setting on the HR92 itself to a high...

If you open up the case and carefully bend the tabs holding the PCB to the sides you can pop out the PCB. You'll find the battery contacts contact copper pads on the rear of the PCB and that the...

If you have the new WiFi model of controller then you can simply choose to bind a new temperature sensor for the zone and it will replace the old one without needing to delete the zone or touch any...

Hmm, I think you're a little confused on a few points.

1) Comms outages don't cause the bindings between devices to be lost. Rebinding them only has a placebo effect, so you're wasting your time...

Just timed one of mine and it takes about 30 seconds to go from fully off to fully on, so a full minute does seem a bit slow, but not exceptionally slow.

If you temporarily swap that HR92 with...

We're S-Plan as well however I have 3x BDR91 - hot water and heating zone valve relays and a boiler relay, so I do get the cycle time adjustments. (As well as hot water overrun)

Anyone know whether Lightwave also supports the Honeywell wall thermostats like the DTS92, or whether it's only the radiator controllers like HR92's ? Can't find anything one way or the other on this...

Unfortunately I have no experience with the HCC80R or underfloor heating, so I don't know the answer to that question.

What I do know is that when you use a boiler control relay with TPI if the...