Search:

Thanks Karam,

I can confirm that the upgrade went smoothly with no issues.

Hi guys,

Im considering upgrading the laptop that currently runs CorexW10 form Windows 7 to Windows 10.
Do you know if I would have to get a new licence for Cortex or will it keep working as is?...

It would be good to hear how you do. We use the Web API to communicate with our Pellet Boiler.
It integrates nicely as we also use Cortex to control our UFH/Radiators and to monitor the water...

Hi Karam,
Im sure your right about the meter readings.

This is what I have done so far:
I have placed the LED bulbs onto another circuit. They stay on when the channel is switched off unless I...

Hi All,

I'm seeing some strange behavior on one of my QLDs. It will not turn off a circuit (controlling two LED bulbs).
Cortex shows the light as being off in the interface and the LED on the...

Thanks for extra info Nad.
I have gone with the option of adding an incandescent bulb in parallel and placing this bulb in a cupboard. Its not an ideal solution but as these lights use special lamps...

Thanks Karam,

I will send you a profile dump on Friday when I get home, and in the meantime I will look into the resloads and the possibility of an additional bulb on the circuit.

Cheers

Mark

Hi All,

Over the weekend I added two sets of Ikea BÄVE LED Track Lights to a QLD channel. See link:BAVE.
The problem is that when they are turned off they continue to flicker.
These are the only...

I see the odd mention of AUI here and there and I am fascinated. Has this been released yet or is there a spec sheet available?

Mark

Hi Viv,

The modules are powered via an MPD.

Mark

Thanks Karam,

Any help would be greatly appreciated.
I agree that Reflex should just be a fallback for when Cortex is not available, I would just like to ensure that when Cortex is unavailable...

Hi Guys,

I have had Idratek up and running for a few weeks now (Mostly controlling lights, extractor fans and towel radiators) and all seems to be going well. I have had a few glitches with power...

I have come up with a solution to this issue.
It may not be the best option but here goes in case anybody else finds themselves in a similar situation.

I have created a macro which after a...

Hi All,

I have a number of QLD/QRIs setup running from a combination of motion sensors and switches.
I have found that I have a requirement to be able to periodically alter the Room "Occupied...

Thanks Karam,
The firmware update has worked a treat.
Great service.

Mark

Thanks Viv have emailed Idratek with details.

Hi Guys,
Im having some trouble generating the relevant auto reflex commands for a PLH module.
I have a very simple setup consisting of a
- DRB with one light connected to relay 2 and and a...

The sensor was wired directly into the QAI units inputs and took power from the idranet connector.
I have not yet calibrated it to return the measured distance. It is just activating on measurement...

I have been testing one of these on my network recently. I have it connected into a QAI. The response of the unit is quite good up to about 50cm which is perfect for what I need them for i.e...

I would be very keen for this to be added, as our home is very open plan we are going to have to use the beam break approach quite a lot.

Mark

Hi Ian,
Welcome to the forums. I would just like to mention from the start that I am not an expert in any of this but lots of others on this forum are.
As I am in the same position as you at the...

Hi Guys,

We are currently in the process of renovating our Medieval Cottage and have decided to implement a high level of automation and av distribution. As we currently have no roof and only a...