Search:

1stly I really like being able to control my central heating without having to rely on an internet connection and cloud support. I have a number of smart devices that would cease to function if the...

ooops... would help if I read to the end of the message... sorry.
ok I agree with you, I'd especially like to be able to grab that via the sdk so I could graph it along with the rest of the info you...

Long press setting and look at the system summary, it gives you the percentage each room is calling etc.

Just spotted this, after experiencing exactly the same thing, and doing a post (my initial search params didn't find this).
I'm guessing that with no replies you had no joy in finding a solution?

System has been working fine for 2.5 years

The control Panel informed me it had comms fault with one of my HR92's
Went to investigate and found it was almost impossible to read the display.
The...

I notice there has been a lot going on today (27/01/2021). I've had at least 3 separate interruptions.
Anything interesting happening?

I had a look back and realised I complained about this last year. Based on the comments then and my experience, I think the problem is when just 1 room is calling for heat. It sort of compensates to...

I had it set to normal. It had actually been working fine for a for a couple of weeks, just that for some reason it went wrong last night. Could be that we have a combi boiler so if someone runs a...

Cold Weather and just remembered why I disabled 'advanced load scaling' last year, went up to bed last night and all the bedrooms were freezing, well below their set temperatures, and they were meant...

I have just had a Chameleon IHD6 Smart meter installed.
It is a CAD (Consumer Access Device) which I can connect to my wifi and it gets given an ip address.

Sadly it looks like there is no way...

1stly I am just thinking about this, it will be a while before I can implement anything.

I have a new thermal store heated by 2 immersion heaters. I got them to add a couple of sockets so I can...

I had to switch off advanced load scaling a couple of days ago.
It had got a little bit cool in the evening so wanted to warm the bathroom up a little. 20 minutes later the boiler still hadn't fired...

In the API Evohome has humidity info alongside temperature, could they have an option to take humidity into account?

Summer confuses me. Logically I shouldn't have to change anything, but for some reason in the summer a given temperature feels warmer then it does in the winter with the result that heaters come on...

Strange. My email shows 12 attachments, the 11 images used in the email and 1 pdf.

The pdf has all the images except 003.jpg

I just got my email, did you get a pdf as I find that easily readable. I agree though that the images in the email are useless.

Got my email, just want to point out that I was unable to select my boiler at the home monitoring portal registration. I have an Atag iC Economiser 39 Plus, which is part of their current range, but...

I have lots of pretty graphs showing the temperature of all my rooms.
Assuming I know the outside temperature, then based on the temperature difference and speed at which the temperature drops in a...

Spose which is better. I don't know hive but was wondering now that they have radiator valves can it pretty much do what eveohome can. Do you need an active internet connection to control the valves,...

Have you tried sitting next to the radiator and using your phone to set very high and 5 deg temperatures and waiting up to 5 mins to see if you can hear actuator responding.
Also is the problem the...

I have a long thin room configured as 2 zones, but that is only because once end is sort of my office and the other end is the living room... so I spend most of the day at one end, and then evening...

Perhaps you should have posted this in the heating forum.
My evohome installation mostly works fine and despite its shortcomings I'd much prefer to have it then not.
That aside it would be nice if...

I have an Atag boiler, long guarantee and pretty efficient.

why diodes and not a resitor?

BTW instead of using a radiator as a bypass I have an 'automatic bypass valve' which I think is better, unless you have an area you want to constantly heat.