All I could suggest is a mercury thermometer that you could check calibration in iced and boiling water (at sea level).
I have never tried to establish absolute accuracy for room temperature as we...
Type: Posts; User: CT1
All I could suggest is a mercury thermometer that you could check calibration in iced and boiling water (at sea level).
I have never tried to establish absolute accuracy for room temperature as we...
Sounds like the batteries are only charged once they have reported as fully discharged. Maybe to prevent the old NiCad memory problem?
Thanks for the info, I may have another look. Another issue I have is that any household tech changes or additions trigger an inbuilt resistance and a long ongoing training commitment.
I found my EchoShow 5 was just too small for the EvoControl skill. I think EvoControl is very good, but the app does what I need and I am used to using it and the EvoTouch, so not felt the need to...
I used a small magnet and a piece of metal to check for any sign of magnetism? Nothing at all.
Maybe part of the prototype, but dropped for production?
Has anyone else found any sign of magnets?
A bit late, but I just checked my mount and there is absolutely no hint of a magnet in either the EvoTouch or the wall moint. I cannot remember ay reference to a magnet on any of the documentation....
Never used optimisation and never felt the need. I just schedule heating to come on and go off at times that give comfortable temperatures when needed. Same for weather compensation. Having a highly...
Same here. I find the app simple to use and it does what I need. It may lack a fancy interface and bells and whistles, but I find that a plus. The fact I general leave EvoHome to just get on with it...
I am a bit rusty on EvoHome but, I believe the HR92 reports the temperature to the Evotouch and then the Evotouch tells the HR92 what to display. Maybe a reboot of the Evotouch is needed? Or I may...
Many of us have found the same thing with EvoHome and use separate room thermostats rather than the TRV sensors.
I have similar problems. Have tried various makes of batteries and bending contacts. No significant long term improvements.
I heat water to 60c before using shower, don’t worry about what it drops to after that so long as it feels hot enough for washing. I work on the assumption that it is only showering that would give a...
My EvoTouch is permanently powered and the rechargeable batteries are only used if I take it off the wall mount, in which case they don’t last very long at all before it starts to beep. Every 6...
Are you referring to the batteries in the T87RF? I have several of these using non-rechargeable batteries. Not had to replace a battery yet, in fact I am now thinking of replacing them to avoid the...
Is 55 with an offset of 7, ie 48 - 55, sufficient for Legionella control?
I would imagine a new set of batteries would require a longer initial charge so there may be a temporary increase in heat from the batteries and the power supply. I did not find the EvoTouch a...
As far as I am aware there have been no developments. I still get the occasional error even though the sensor “box” is only about a couple of feet from the EvoTouch with only a basic plasterboard...
I can only assume that the original Honeywell designer did not expect the cases to need opening again after installation, either that or the manufacturing tolerances have caused the product to be...
Thanks for that, I found several CS92 posts but not that one.
In the end it took 3 screwdrivers, one jammed in each of the two tags at the back of the battery compartment and one to prise open the...
I need to move my CS92 hot water temperature sensor/ transmitter. I can open the cover and remove the batteries but cannot get to the mounting screws. There looks to be a couple of tabs behind the...
We have a system boiler and mains pressure tank. The tank temperature is monitored by EvoHome temperature sensor and you can set it to be kept permanently heated or any timed periods you desire. We...
I worry more about leakage than lifetime. I avoid Duracell, but have not had any problems, so far, with cheap ones from Lidl or GP from Amazon.
I don’t see any problem in having a preheated tank feeding the main tank, but am not aware of anything that could selectively switch the output.
My solar thermal tank only has an immersion for...
I have a Velop Mesh running with split bands and with Guest network off. Evotouch controller connects to the 2.4G with no problem and displays outside temp. Maybe try a complete reboot of the Mesh?
I have never tried using the smart weather feature, partly because the EvoHome outside temperature can be several degrees different to that reported by my outside sensor. Other internet based...