Search:

Type: Posts; User: DBMandrake

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Another example of the outdoor temperature of the...

    Another example of the outdoor temperature of the Evotouch being waaaaaay behind reality.

    It was quite cold last night and is clear and sunny today. At 10am this morning my weather station is...
  2. That was what I thought before I set up a 24/7...

    That was what I thought before I set up a 24/7 independent monitoring system to monitor the wireless transmissions. And it has shown conclusively that in every case where I'm getting a "comms fault"...
  3. And the latest hot water "comms fault": ...

    And the latest hot water "comms fault":

    https://drive.google.com/uc?export=download&id=1PCiKFCIr72OHJXc4m3aaDnVYU03sJwGe
    ...
  4. Perhaps, but all these variations on a theme just...

    Perhaps, but all these variations on a theme just result in the conclusion "poor receiver" in the Evotouch.
  5. Perhaps, but that wouldn't explain why my...

    Perhaps, but that wouldn't explain why my independent monitoring system mounted about a metre away from the controller can always hear the CS92A messages that the controller misses. Unless the...
  6. In my case I think it is indeed the controller to...

    In my case I think it is indeed the controller to blame. I have had the CS92A replaced and also have moved it several times, never has it been completely reliable.

    However when I've compared the...
  7. Sounds like a plan. :)

    Sounds like a plan. :)
  8. Weird, but glad you got it fixed.

    Weird, but glad you got it fixed.
  9. This fits in with what I've observed - unreliable...

    This fits in with what I've observed - unreliable reception of the sensor by the Evotouch.

    Unfortunately in my case they are only about 5 metres apart with one solid wall and one wooden frame...
  10. Ah yes, if the white base is not screwed down...

    Ah yes, if the white base is not screwed down onto the valve body properly it may not push the pin down far enough to totally close it.

    So it needs to be down enough but not enough to damage the...
  11. I've had the entire CS92A kit (including sensor...

    I've had the entire CS92A kit (including sensor probe) replaced under warranty early on. Didn't help.
  12. Replies
    9
    Views
    364

    The Alexa integration can only set a basic...

    The Alexa integration can only set a basic override - eg until the next scheduled set point. You can't set a custom end time, nor cancel the override. (You can only override it back to the original...
  13. I actually rotated mine back again... :) While...

    I actually rotated mine back again... :)

    While it made the signal stronger for my independent receiver (which has a vertically polarised antenna) it didn't really solve the problem, and I think...
  14. Don't unscrew the bronze nut unless you want...

    Don't unscrew the bronze nut unless you want water everywhere. :)

    The balancing insert is the small black plastic bit with a small hex on it. You can unscrew it right out with just your finger...
  15. Can you give a bit better description of what...

    Can you give a bit better description of what symptoms you're seeing ?

    Pairing of devices shouldn't be lost due to a firmware update.
  16. Putting a regular thermostat in series with the...

    Putting a regular thermostat in series with the relay set a bit higher than Evohome would certainly limit the overshoot, but there is also the risk that if it triggers before 55C it will stop the...
  17. Hi Dan, Sorry to hear you've having these...

    Hi Dan,

    Sorry to hear you've having these problems. You're not alone. It looks like you have researched the problem well. I'm sure you've read some of the threads I've posted about this issue in...
  18. First really chilly morning this morning. ...

    First really chilly morning this morning.

    6:30am:
    My outdoor weather station - 5.8C
    WeatherPro on iPhone (Meteogroup) - 5C
    iPhone built in weather app - 7C
    Accuweather - 9C
    Evotouch - 9C
    ...
  19. Just use custom mode configured to 5C instead of...

    Just use custom mode configured to 5C instead of Heating Off.
  20. This should be a fairly easy problem to diagnose....

    This should be a fairly easy problem to diagnose. Start with the basics.

    Turn the zone down to 5C, (to ensure the HR92 has fully closed the valve - listen to it to make sure you hear it closing)...
  21. Ok, got it, normal means outside temperature is...

    Ok, got it, normal means outside temperature is taken into account and partial means it isn't. Just what us nerds want to know. :)

    I could have sworn Normal was called "Full" in the first Beta...
  22. So what you're saying is both scaling modes have...

    So what you're saying is both scaling modes have heuristic learning for the characteristics of the zones which allow them to adapt over time, however full load scaling takes outside temperature into...
  23. Are you on 19.31 or 19.33 ? (check with a very...

    Are you on 19.31 or 19.33 ? (check with a very long press on the device info button in settings)

    This was a known bug in the first beta (19.31) but should be fixed in 19.33. At least it is for me...
  24. That sounds to me like a momentary loss of comms...

    That sounds to me like a momentary loss of comms between the Evotouch and the boiler relay. If it said 100% heat demand for the boiler relay and the relay stayed off, then that is not right, and is...
  25. Which online weather service gives weather...

    Which online weather service gives weather reports more granular than by city ? None that I've seen.

    Also if you're in a smaller city/town you're likely to be getting a weather report for a nearby...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4