Search:

Same here...

Same here. App says “planned maintenance “

Thanks both for the pointers. Hopefully the VR33 will arrive next week and I'll have a play.

Bringing back the old thread rather than start a fresh...

I've had the current monitoring going for a while now, have added the functionality to read the fault log from the boiler as well and I'm...

Sorry for delayed response.

This was the way I originally set very thing up, straight after clearing the bindings. However I deleted the bings again & went back through it & it’s now working. ...

I'm sure this is something Im doing wrong!

I've added a DT92E thermostat and BDR91 to control an electric heater. everything seems to have bonded correctly and the "actual temperature" shown on...

So it turns out a bad connection between the usb/ebus converter and the boiler was the cause of some dodgy readings.

A little bank holiday reading and around 100 lines of python code has produced...

Yes, have done that as described. I get the output as shown here - https://github.com/john30/ebusd/wiki/6.-Hardware

I have been doing some further reading and think perhaps my understanding (and...

Having the same issue. Neither international.mytotalconnectcomfort.com nor the iPhone app are allowing login.

I've finally found some time to get this setup. I went with the pre-made device from https://www.esera.de/produkte/ebus/135/1-wire-hub-platine

and following the guidance from the link above I...

Thanks Bruce - was just reading there as you posted.

Plan is to use a RaspPi. As for the eBUS interface, I'd much prefer the purchased option rather than solder up my own.

I'm looking at doing something similar with my EcoTech plus 832. Could you share more details on setting this up with a "beginner level" bias please :)

My main objective to start with is just...

WiFi software: V:02.00.17.00
Application software: V:01.00.07.01

Had issue adding external siren to an install I’d started a few weeks ago. The international portal (apparently) was having issues at the weekend, which was why I couldn’t add. Eventually got it...

Hi,

Is there anyone here from Honeywell that can assist with a EvoHome Security install issue. I am being given the run around by consumer support & would appreciate being pointed in the right...