Doing some research could it be that level shifting is required between the 5v Nano and the 3.3v CC1101 ? have a look at this diagram on Simon Monks github ...
Type: Posts; User: ukhauk
Doing some research could it be that level shifting is required between the 5v Nano and the 3.3v CC1101 ? have a look at this diagram on Simon Monks github ...
I found this flow that converts to MQTT kindly contributed by hwijers
https://community.home-assistant.io/t/honeywell-evohome-hgi80-usb/44899/4
See the file...
Possibly another +1 for the Wifi unit and wall plate depending on price. Thanks for listening to customers.
---------------------------------------------
for device in fullData['devices']:
print device['thermostatModelType'], device['deviceID'], device['name'],...
Start by writing something simple printing "hello world" search for Python in YouTube and get something working that's how I started.
I use Geany to write edit and test looks like it's available for windows http://www.geany.org/Support/RunningOnWindows
The API has been written in Python. You can download and install Python for windows. Loads of material on YouTube about Python
Hi Roy are you in a position to share the scripts that Set Economy mode and Away mode running on a Raspberry Pi ? what type of alarm system are you monitoring ? I have had some joy with comfort.
This is fantastic work Roy thanks for sharing
Done Survey hope it helps
Yes the system call for heat from the boiler until "each" room is at the desired temperature set by the CM67z ?
Each HR80 radiator actuator has a temperature sensor built in
The CM67z creates...
Hi is the red light flashing on the HC60NG if so what frequency
can you hear the HC60NG energising just thinking it might be a fault on the boiler wiring
My parents have a fire that's operated by an rf remote, It stopped working last year I found the fault was the gas valve controller made by a company called dungs http://www.dungs.com/en/index.html
...
you won't find anything better than the Honeywell CM zone
no wiring on rads replace your timeclock with the receiver
it has 2 zones + if you buy another programmer you can additional zones
6...
Just had this very helpful reply from a supplier
It's no problem to us to send to UK.
Payment in advance to our bank account.
Norway is outside of EU so you must not to pay a Norwegian VAT...
A few options spring to mind
1) http://www.letsautomate.com/12478.cfm? dial in to enable htg via an interface relay some wiring knowledge required
2) use homeseer to schedule the heating use an...
If you install Homeseer you can enable the Homeseer web interface
Using your pronto type in the browser the PC ip addreww and hey presto all your devices and their status will appear !
If you...
In particular, how do I manage the earlier warm-up requirement of rooms using underfloor heating to compensate for the thermal lag of such systems
If you use Hometronic to control the underfloor...
I have a similar set-up using a modified Z-wave module in place of your x10 module.
1) Why not leave a room thermostat in series with your X-10 module this way if the house is warm the boiler...
The perfect solution might be Honeywell's Hometronic Kit
http://europe.hbc.honeywell.com/hometronic/default.htm
1) Its Radio based so won't involve chasing walls out and cables everywhere
...
The perfect solution might be Honeywell's Hometronic Kit
http://europe.hbc.honeywell.com/hometronic/default.htm
1) Its Radio based so won't involve chasing walls out and cables everywhere
2)...
Don't know if this is old news but I noticed an indoor Wall Mounted Passive Infrared Sensor is now available.
ZIR010 Zwave Motion Sensor, Euro Spec
http://www.automatedoutlet.com
...