I agree.
I've just checked on the website - the User Guide is dated 2020 and mentions "smart weather" options but doesn't say how to set them; the installation guide is also dated 2020 but is still...
Type: Posts; User: DorrisMancer
I agree.
I've just checked on the website - the User Guide is dated 2020 and mentions "smart weather" options but doesn't say how to set them; the installation guide is also dated 2020 but is still...
Thanks, especially for those links. If it's as good as they say it might be able to make coffee as well ;-)
More seriously, they look like worthwhile improvements but what's the real-world...
Production code roll-out
I've kept my head down while the Beta code was being tested but it seems that the new production code is now starting to be rolled-out. Will people receive a notification...
Hmm, mine are similar but slightly different. I've ordered a V120-15a so will investigate further once I've got the old valve off. At the moment I've stopped the leak by leaving the head off and...
Thanks for the reply. I've just had a look at another valve and what I called a thin plastic ring is actually a white plastic bush with a hex nut moulded onto it, which fits in a metal nut. There's...
I had an unpleasant surprise when I removed an HR92 head and adapter yesterday - water started to come out, as did the valve pin. Replacing, and screwing down, the adapter stopped the leak but I need...
Thanks!
In case anyone else has the same question (and for when I need to do it again and have forgotten!):
clear all T87 bindings by touching the lower left of the faceplate for 10+ seconds,...
4 years studying for an Electronic Engineering degree in the 70s, later CEng and FIET, but my hands-on days were a while ago ;-)
In a room with 2 rads the temperature is currently being sensed by one of the HR92s and I want to replace the sensor with a T87 wall stat. I did it last year in a different room but can't remember...
I thought I recalled reading something about being able to use it as a monitor. Where can I find guidance on what to do?
I've got a large'ish Evohome system and have recently acquired an RFG100 as part of a box of bits, can it be used for anything useful (such as monitoring)?
FWIW the same happened to me last night.
I think the only viable ways to provide fuse protection for the PSU is either a non-replaceable in-line fuse in the back box or a remote fused spur. The advantage of the latter is that the PSU could...
I've got 2 controllers. One is fitted where the old thermostat was, with mains fed down the old cable from the wiring centre (which is in a boiler room), but the other is on the landing and currently...
Has anyone noted a reduction in range when using the controller on an ATF600 wall mount (with the power supply in a metal back box) compared to when free-standing?
I'm wondering whether it's worth...
My two-controller Evohome system has been working well for a couple of years but several of the room temperature settings appear to have been changed recently - but not by my wife or I!
Has anyone...
In an absent-minded moment I broke the stop tab on one of mine too but, fortunately, it's fairly easy to set the wheel to the correct initial position by inspection.
A couple of suppliers have the...
I'm now tempted to buy a pipe thermometer - has anyone tried the cheap "clip-on" type, such as https://www.amazon.co.uk/Clip-pipe-thermometer-hot-water/dp/B00GYV0L5I ?
So how do you decide where to set the boiler temperature control?
(Am I the only one who reduces the boiler temp "a bit" in the summer, turns it back in the winter, and increases it "a bit" in...
We're told to have DHW set to 55deg to avoid legionella problems. I don't have the ability to measure the output temp of the boiler, and the dial on the W-B boiler isn't much use, but if it's set...
Thanks for all the replies but I'm convinced that the use of custom (as described by DBMandrake and others) is the best solution. It allows rads in individual rooms to be turned-up during chilly...
Currently they're set-up as one for upstairs and t'other for downstairs, powered from the C/H supply via the old thermostat cable. I'd thought about having one on the landing (and using it for T...
I have two controllers that are currently next to each other. I'm planning to move them and it occurs that it might be beneficial (although a pain to do) to put them at least 300mm apart. Has anyone...
Not if someone turns-up an HR92 and doesn't turn it down again.
I've now set all zones on one controller, and all but one zone on the other, to custom (renamed summer) which is simply a series of...
Thanks. It sounds as if a renamed "custom" is the solution.
As mentioned in another thread, this isn't a good solution because the valve will still open
(By "current" I meant the version...