Search:

Type: Posts; User: oxygen

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    28
    Views
    3,250

    Somewhat unrelated to the Boillers listed in this...

    Somewhat unrelated to the Boillers listed in this thread, I have a feeling that something is going wrong with OT in my setup.
    Or more exactly that OT is creating some side issues.
    I'm running a...
  2. And to add to this, it is somehow critical to get...

    And to add to this, it is somehow critical to get those data, as:
    - CH Pressure dropping may cause the boiler to shutdonw.
    - DHW Temp is read even if the DHW module is not enabled, proving that it...
  3. So we do confirm that the requests/data pulls...

    So we do confirm that the requests/data pulls from the controller to the OT Gateway seems to have changed with the new firmware, but on a very specific scenario:
    The loss of OT data observed by the...
  4. It seems I now have the same issue as you do....

    It seems I now have the same issue as you do.
    I've lost:
    - Boiler Temperature
    - DHW Temperature
    - Return Temperature
    - Control Point Temperature
    - OEM Fault Code
    - CH Water Pressure
    - Fault...
  5. As I was going to be away for the holidays, I...

    As I was going to be away for the holidays, I haven't done the controller reboot yet.
    But I have not forgotten about this, and will proceed now asap.

    I'll let you know if I indeed loose the OT...
  6. Disconnecting and reconnecting fixed the issue....

    Disconnecting and reconnecting fixed the issue.
    Knowing that I could control the evohome through the API or thought the app proving that it was rightly connected/mapped to my account. It still was...
  7. I have a graphic bug also. In the optimisation...

    I have a graphic bug also.
    In the optimisation settings, the delayed start is grayed if already active.
    If I go in the delayed start to re-select it, then it goes back to normal (non grayed).
    If I...
  8. So indeed. The controller don't have an outside...

    So indeed. The controller don't have an outside temperature showing up.
    But the controller is linked with the web/application. And the application has a location set, and can show the outside...
  9. I do have a location set in the TCC account. ...

    I do have a location set in the TCC account.

    But I'm not 100% sure that I have a temp showing up in the main screen (the outdoor temp)
    As my controller is 2 stories down, I need to go and have a...
  10. It is still not showing up there 😞 I do have the...

    It is still not showing up there 😞
    I do have the eco/boost visible, but nothing related to the cold weather boost.
    I may need to check if the controller knows my location. My understanding is that...
  11. Well, it seems I don't have it:...

    Well, it seems I don't have it:
    https://rehost.diberie.com/Picture/Get/r/33207

    Would it be because of the French language ?

    The firmware is correctly in 02.00.19.33 in the details. (Wifi is...
  12. Have you tried to remove the HR, and re-install...

    Have you tried to remove the HR, and re-install it, so for the HR to re-do a valve cycle check ?
    Also, are the valves of the same model ? You may want to check if the HR are set at the same...
  13. Is the Cold Weather setting avaiable to all (I...

    Is the Cold Weather setting avaiable to all (I mean, also for those with an OT relay, not a basic BDR91 ?)
    I think I don't have it on my settings screen.

    Also, as for the other features I would...
  14. I've received the update last night it seems. So...

    I've received the update last night it seems.
    So far, I'm still collecting all this data from the HGI80.
    It may be due to the boiler controller behaving differently on different setups ?

    I'm...
  15. Update received, I'm running now the 19.33

    Update received, I'm running now the 19.33
  16. I've filled up the form, hopefully, it is still...

    I've filled up the form, hopefully, it is still possible to join the beta phase.
    I suppose I have a setup that might get usefull (mix of HR91/HR92, a few zones with multiple valves, and a few with a...
  17. I guess your suggested approach (get Domoticz to...

    I guess your suggested approach (get Domoticz to get the HGI80 to collect OT data) might solve multiple "issues" on the current way requests/data is handled:
    - Currently, I think I'm missing the...
  18. Hey there :) I've just seen about the new...

    Hey there :)
    I've just seen about the new firmware, and the bug you are facing.
    I'm still running the old firmware, so I'm a bit "scared" to ask for the new one when I read about your bug.

    So if...
  19. Yup, all is working fine now :) You can see the...

    Yup, all is working fine now :)
    You can see the "drop" to zero, and a few spikes occuring around 9.30ish this morning, and then back to zero.
    This is better (and map the error values the boiler...
  20. It's a tricky question. The thing is my config...

    It's a tricky question.
    The thing is my config generates a lot of errors. This is not your code, this is really my setup (My Perfinox 4100 is not officially OT compatible, yet beeing controlled by...
  21. It makes sense, even if it means that I cannot...

    It makes sense, even if it means that I cannot activate the device until it generates it first error code.

    My boiler generated a new OEM Error code, so I've been able to add it, but I'm still...
  22. Yes, all seems good. But I've the feeling I've...

    Yes, all seems good.
    But I've the feeling I've lost the error codes reporting.
    It's a good thing to keep them somehow, as in my config, the boiler sometimes is getting trouble following the orders...
  23. That was my undertanding. And it looks promissing...

    That was my undertanding. And it looks promissing !
    But i will wait until you push the code into the dev/beta branch to update my install. I'm chickening out ;)
  24. I confirm that the new code you pushed late 2019...

    I confirm that the new code you pushed late 2019 in the main dev branch of Domoticz is working fine.
    It shows proper values on my system (based on a Perfinox 4100 + HGI80 + OT Bridge).
    I'll need to...
  25. Hello Ramses, If it is possible, I feel that...

    Hello Ramses,

    If it is possible, I feel that having a detailed overview of the devices attached to the various zones would be of huge help to confirm if a "complex" zone is properly configured:
    -...
Results 1 to 25 of 32
Page 1 of 2 1 2