Search:

Type: Posts; User: Edinburgh2000

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    24
    Views
    2,913

    Indeed. But a BDR91 only performs TPI to the...

    Indeed. But a BDR91 only performs TPI to the instructions it is sent by the Evohome controller (i.e. % output). All BDR91s are identical but, for example, those configured to control Hot Water...
  2. Replies
    24
    Views
    2,913

    I don't think that "short cycling" can be...

    I don't think that "short cycling" can be anything to do with the Evohome controls or TPI. If you have not configured a boiler relay or any zone valve, then Evohome is not applying TPI control to...
  3. Replies
    24
    Views
    2,913

    ....and what do your "System Summary" and "System...

    ....and what do your "System Summary" and "System Devices" look like? Here are mine (inc. "System Parameters", which you posted above for your system):

    1767
    1765
    1766

    Does your "System...
  4. Replies
    24
    Views
    2,913

    Bear in mind that the cycle rate applies to zone...

    Bear in mind that the cycle rate applies to zone valves, as well as to the boiler. If your valves are controlled by TPI, then they will open and shut as many times each hour as your cycle rate. I...
  5. Replies
    34
    Views
    8,140

    That's interesting. My legacy account has now...

    That's interesting. My legacy account has now been closed.
    1740
    And if I try a password reset it denies I ever existed.
    1741

    I have no web access to Loop any more. I do, however, have an...
  6. Replies
    34
    Views
    8,140

    I emailed Loop about the general mourning of the...

    I emailed Loop about the general mourning of the demise of its gas monitor and I was pleased to receive a prompt and sincere response, explaining that the root cause of the discontinuation of the gas...
  7. Replies
    34
    Views
    8,140

    I have now installed my Smappee Gas Monitor. My...

    I have now installed my Smappee Gas Monitor. My initial comparison with the Loop Gas Monitor is:

    Pros

    Provides status reports – Battery level; Temperature; Humidity

    Batteries are...
  8. Replies
    34
    Views
    8,140

    Yes. I bought this Smappee Energy monitor...

    Yes. I bought this Smappee Energy monitor in December 2017. It is no longer available. I am trusting that my Gas & Water Monitor, when it arrives, will connect to the legacy Energy Monitor.
    ...
  9. Replies
    34
    Views
    8,140

    I've had the same problem, of the Loop gas...

    I've had the same problem, of the Loop gas monitor being discontinued. I have just ordered a Smappee gas monitor. Although Smappee is more geared up for professional installers, if you have the...
  10. Replies
    10
    Views
    2,900

    I am not a member of the beta team either, but I...

    I am not a member of the beta team either, but I noticed yesterday that my system has been modified. I spotted the icon for the hot water cylinder has changed, such that it looks different while it...
  11. Replies
    20
    Views
    3,499

    It's an age thing, nothing to do with geography. ...

    It's an age thing, nothing to do with geography. In the 'old days' all the wiring for central heating systems was at mains voltage. Like DorrisMancer, my thermostats were all wired with three core...
  12. Replies
    2
    Views
    963

    Just to break the silence....... I have found...

    Just to break the silence.......

    I have found exactly the same as you. I have a CC dashboard but can see no way to include the hot water from Evohome on that. Just letting you know that you are...
  13. Radiators should be plumbed in parallel, not in...

    Radiators should be plumbed in parallel, not in series. Like this:

    1415
  14. Glad it's sorted. Well done. Cheers! :)

    Glad it's sorted. Well done. Cheers! :)
  15. It does sound as though the Lyric is working OK. ...

    It does sound as though the Lyric is working OK. What happens if you replace the jumper between Lr and Ls on your boiler (ST8)? The boiler should be fooled into thinking heat is being demanded. ...
  16. The Ns terminal on the ST8 block is only there...

    The Ns terminal on the ST8 block is only there for the old-fashioned mechanical thermostats, which take their power supply from the boiler. Their connections would be a live from the boiler (Ls), a...
  17. Referring to the manual...

    Referring to the manual again, you should have a permanent power supply (live, neutral and earth) to the ST12 terminals in Fig. 11 (item 1). That is the only neutral that the boiler needs. Fig. 8...
  18. I think this is the manual...

    I think this is the manual for your boiler. In which case, yes, T1 and T2 on your diagram are Ls and Lr in Figure 13. Apologies. I had not appreciated that the 35CDi can be operated at 230V. I...
  19. Have you really connected the 230V supply into...

    Have you really connected the 230V supply into the T1 terminal on the boiler? I do not know about the 35Cdi boiler but my Worcester GB162 operates on 24V. I have a relay that closes the contacts...
  20. I have stuck with the 'one zone per floor'...

    I have stuck with the 'one zone per floor' approach, controlled by Evohome, rather than universal HR92s because:
    (a) 32 HR92s would cost me about 1.5k, which I don't want to spend;
    (b) Several of...
  21. I have Evohome but I don't use HR92s, so my...

    I have Evohome but I don't use HR92s, so my experience is not directly relevant to you. However, I do have a GB162 65kW boiler in a three storey Victorian house with 32 radiators. I have no...
  22. I can assure you (and "Evo Home Support") that...

    I can assure you (and "Evo Home Support") that there is frost protection, whether they call it that or not. The "Off" setting simply moves the setpoint to 5oC. It even applies the differential on...
  23. Replies
    463
    Views
    75,075

    I received an automated e-mail on Monday 21 Jan...

    I received an automated e-mail on Monday 21 Jan alerting me to a loss of comms with my Evohome system. The web app is now looking like this:

    1366

    and the phone app is showing the same message....
  24. What temperature was your Evotouch showing for...

    What temperature was your Evotouch showing for the hot water? At this time of year I see my hot water coming on when it is scheduled to be off, because my incoming cold water is below 5oC. Even...
  25. Replies
    24
    Views
    6,808

    I have a Megaflo 210i. But my cylinder has a...

    I have a Megaflo 210i. But my cylinder has a purpose-built pocket for a separate temperature sensor, like the one provided by Honeywell's Evohome CS92. A picture of my cylinder is attached here. ...
Results 1 to 25 of 138
Page 1 of 6 1 2 3 4